Simulation of Sloshing Loads on Moving Tanks

Printer-friendly versionPDF version

The aim of the presentation is to demonstrate the possibilities of predicting loads on partially submerged, moving structures, in particular on tanks in ships and on offshore platforms. Since tanks can in reality move arbitrarily, we are using the moving grid approach and a Finite Volume solution method designed to cater for  arbitrary motions of polyhedral control volumes. The motion of liquid is computed using an interface-capturing scheme which allows overturning and breaking of  waves. By performing a coupled simulation of the flow and vessel motion, it is possible to obtain a realistic response of the liquid in a tank to external excitation, e.g. by sea waves. Results are first presented for several tanks whose motion is prescribed in accordance with experimental setups, with which the solutions are compared. A very good agreement between pressures computed in simulations and experimental data at representative locations is obtained. It was possible by means of simulation to clearly distinguish between offresonance and resonance cases, in which peak pressures reached the highest values, in accordance with  experimental observations. Following validation by experimental data in laboratory setups, we demonstrate the plausibility of simulation of both vessel motion and  the flow inside and outside vessel. The forces and moments exerted by the sea cause the vessel to move, which excites the sloshing of liquid in tanks. For the computation of vessel motion, both sea-induced forces and forces due to sloshing in tanks are taken into account when determining the resultant forces and  moments. While there are no experimental data to compare with, the results look plausible and encourage further validation and application studies.

Author Name: 
M. Perić
T.Zorn
Conference Location: 
Halkidiki, Greece
Rights: 
ASME
Pages: 
10
Conference Date: 
Sunday, June 12, 2005
Paper Reference: 
OMAE2005-67581
Conference Name: 
24th International Conference on Offshore Mechanics and Arctic Engineering