STAR European Conference 2011 Presentations

22-23 March 2011, Amsterdam

Experimental Correlation of CFD Results on the Formula 3
Christophe Perrin, ART Grand Prix

The InDesA Virtual Test Facility Environment
Dr. Gerald Seider, inDesA GmbH

Aircraft Damping Derivative Estimation  Using STAR‐CCM+
Angelo Lerro, Politecnico di Torino

Missile External Aerodynamics Using STAR-CCM+
Deryl Snyder, Lockheed Martin Corporation

Aircraft Passenger Cabin Thermal Comfort Analysis
D. Cannoletta, Alenia Aeronautica

High Performance Unsteady Workflows with STAR-CCM+
Steve M. Legensky, Intelligent Light

The Role of Simulation in Accelerating Deployment of Clean and Secure Energy Technologies
Prof. Philip J. Smith, University of Utah

Utilizing STAR-CCM+ to Advance the South African Power Generation Industry
Ignus Le Roux, Aerotherm

Validation of STAR‐CCM+ with the OECD/NEA T‐Junction Blind Benchmark 
Santhosh Jayaraju, NRG

Towards the Direct Numerical Simulation of a Nuclear Pebble Bed Flow 
Afaque Shams, NRG

Advanced Wall Treatment Method for Turbulent Flow CFD Simulations 
Mika Nuutinen, Aalto University

FSI Simulation of Pulsatile Blood Flow in Aortic Arch 
Damon Afkari, Universidad Politécnica de Madrid

Application of STAR-CCM+ to Turbocharger Modeling at BorgWarner Turbo Systems
BorgWarner presentation – presented by Fred Mendonca

Thermal Management of a Turbocharger for Unsteady Operation
Dr. Fabiano Bet, InDesA

Simulation of the WindscreenDefrost Performance
Dr Karamjit Sandhu, Jaguar Land Rover

Automatic HVAC Workflow with STAR-CCM+
Georgios Apostolopoulos, Behr GmbH & Co. KG

Thermal Simulation of an Exhaust Manifold in a High Performance Diesel Engine
Christian Krenn, BMW Motoren GmbH

Modeling Complex Exhaust Gas After-Treatment by STAR-CD/Axisuite Coupling
Dr. Onoufrios Haralampous , Exothermia SA

From Transient Fan Blade Development to System Optimization with Underhood Simulation
Friedrich Brotz, Behr GmbH & Co. KG

CFD Analysis of the Performance of a Fast Catamaran with Rough Sea SEA
Prof. Giovanni Lombardi, Pisa University

From 40 Hours to 15 Minutes, 15 Years of Experience with CFD
Norbert Bulten, Wärtsilä

Parameter Driven Real-Life Design Process through STAR-CCM+ Automation
Mauro Poian, p.èn. Lab s.r.l. & Electrolux s.p.a.

Simulating the Blister Tap Hole Concept Design using CHT Capabilities in STAR-CCM+
Dr. Bennie Henning, Bateman Engineering Projects

The Advantage of Synergy in Civil Engineering
Erwin G. Schnell, Gruner AG

Development of a Metal Foam based Latent Heat Cooling System in the Field of Solar Power Generation
Aron Kneer, TinniT Technologies GmbH

Numerical Investigations on the Performance Characteristic of Radial Fans with Forward Curved Blades by means of CFD
Manoochehr Darvish, University of Applied Sciences HTW-Berlin

Development of an Alternative Cooling System for Inverters of a Solar Plant
Aron Kneer, TinniT Technologies GmbH

Thermal Fluid-Structure Analysis of an Optical Device Including Radiation and Conduction
Timo Laufer, Carl Zeiss SMT GmbH

Axial Compressor Design with AixCompFlow2D and STAR-CCM+
Norbert Moritz, B&B-AGEMA GmbH

Higher Gas Turbine Operation Flexibility by Improved Diffuser Vanes of a Radial Compressor
Anis Ayed, B&B-AGEMA GmbH