CD-adapco is the world's largest independent CFD focused provider of engineering simulation software, support and services. We have over 30 years of experience in delivering industrial strength engineering simulation.
Presented at the STAR Global Conference 2012
Spray nozzles are an important feature of many industrial applications. The traditional way to treat spray is to use Lagrangian particles with a suitable injector modeling in the CFD-simulations.
STAR-CCM+ does provide a model (Pressure Swirl Atomiser and LISA-model) for the primary atomization that allows the user to set several spray parameters such as cone angles and mass flows. However, this method is only applicable to a pressure swirl spray nozzle. If a different spray nozzle is to be used a method that relies on experimental data has to be used, e.g. knowledge of the velocity and droplet distribution has to be known in order to implement the spray in STAR-CCM+.
In order to reduce the need of experimental data a methodology for investigating the primary atomization has been developed using STAR-CCM+. The method provides data such as velocity and angles for a simulated mass flow in a given geometry. This data may subsequently be used as input data for any of the Lagrangian injectors that are provided within STAR-CCM+.