Technical Library

Some articles have copyright restrictions,
in order to download these you will be redirected to the copyright holder's website.

 
Name Author(s) Datesort ascending
UNSTEADY SIMULATION OF A 1.5 STAGE TURBINE USING AN IMPLICITLY COUPLED NONLINEAR HARMONIC BALANCE METHOD Chad H. Custer, Jonathan M. Weiss, Venkataramanan Subramanian June 11, 2015
COUPLING OF 3D NUMERICAL SOLUTION METHOD BASED ON NAVIER-STOKES EQUATIONS WITH SOLUTIONS BASED ON SIMPLER THEORIES Sven Enger, Milovan Perić, Henrique Monteiro November 23, 2014
A Computational Approach for Optimizing the First Flyer Using STAR-CCM+ Abdul H. Aziz July 31, 2013
Fluid/Thermal Modeling of a LOX/Propylene Thruster with Radiative and Fuel Film Cooling Glen Guzik July 31, 2013
Numerical Simulation of a Hydrocarbon Fuelled Valveless Pulse Jet Joseph Kalyan Raj Isac, Logu M July 31, 2013
CDF code validation of rotor/fuselage interaction using the commercial software STAR-CCM+8.04 Boris Kubrak, Deryl Snyder July 1, 2013
UNSTEADY SIMULATION OF A TWO-STAGE COOLED HIGH PRESSURE TURBINE USING AN EFFICIENT NON-LINEAR HARMONIC BALANCE METHOD Chad H. Custer, Jonathan M. Weiss, Venkataramanan Subramanian, Kenneth C. Hall June 3, 2013
Numerical Simulation of High Lift Trap Wing using STAR-CCM+ Prashanth Shankara and Deryl Snyder June 25, 2012
From Blank Slate to Flight Ready New Small Research UAVs in Twenty Weeks - Undergraduate Airplane Design at the University of Washington Eli Livne, Chester P. Nelson January 9, 2012
Analysis of Asymmetric Aircraft Aerodynamics Due to an Experimental Wing Glove Fletcher Hartshorn June 27, 2011
SIMULATION OF UNSTEADY TURBOMACHINERY FLOWS USING AN IMPLICITLY COUPLED NONLINEAR HARMONIC BALANCE METHOD Jonathan M. Weiss, Venkataramanan Subramanian, Kenneth C. Hall June 6, 2011
Validation of unstructured CFD modeling applied to the C3X turbine including conjugate heat transfer F. Mendonça, J. Clement, D. Palfreyman, A. Peck March 1, 2011
Near-Field Characteristics of Wall Jets with Tabs C. A. Orrala, J. Ji, H. Hoang, H.R. Rahai June 28, 2010
Mechanical Erosion of Graphite Nozzle Material in Solid-Propellant Rocket Motors P. Thakre, R. Rawat, R. Clayton January 4, 2010
COMPUTATIONAL AEROACOUSTIC ANALYSIS OF A ¼ SCALE G550 NOSE LANDING GEAR AND COMPARISON TO NASA & UFL WIND TUNNEL DATA Thomas Van de Ven, John Louis, Dean Palfreyman, Fred Mendonça May 11, 2009
Energetic-Nanoparticle-Enhanced Combustion of Liquid Fuels in a Rapid Compression Machine Casey M. Allen , Tonghun Lee January 8, 2009
A Computational Study of Icing Effects on the Performance of S-Duct Inlets Wonjin Jin, Ray Taghavi July 21, 2008
Simulation of a Sonic Nozzle by a Numerical Code P. Spazzini, O. Caramia September 19, 2007
Conjugate Heat Transfer Analysis of a Cooled Turbine Vane Using the V2F Turbulence Model Jiang Luo, Eli H. Razinsky June 5, 2006
Evaluation of bespoke and commercial CFD methods for a UCAV configuration M.E. Milne, M.T. Arthur June 5, 2006
DES Validations of Cavity Acoustics over the Subsonic to Supersonic Range Richard Allen, Fred Mendonca May 10, 2004
CFD PREDICTION OF NARROWBAND AND BROADBAND CAVITY ACOUSTICS AT M=0.85 Fred Mendonça, Richard Allen, Julien de Charentenay, David Kirkham May 12, 2003
High-Lift Aerodynamics: STAR-CCM+ applied to AIAA HiLiftWS1 Deryl Snyder
Optimate Evaluation: Design Optimization of a Generic Glider Nathan Richardson
Feedback Driven 6-DoF Modeling of a Tilt-Duct Aircraft Paul Vasilescu
Prediction of Noise Emission from the NASA SR-2 Propeller Keng Soon Voo
Surface preparation and meshing in STAR-CCM+ Sun Lee
STAR-CCM+ Capabilities for Aerospace & Defense Deryl Snyder
Meeting the Challenges of Fluid-Structure Interaction Alan Mueller
Numerical Simulation of DLR-F11 High Lift Configuration using STAR-CCM+ Prashanth Shankara, Jeremy Hanke & Deryl Snyder
Continuing Challenges in Aeroacoustics Fred Mendonça
S-ducts & Nozzles: STAR-CCM+® at the Propulsion Aerodynamics Workshop Peter Burns
1-D/3-D Co-Simulation of Environmental Control System for Aircraft Klaus Wolf
Discover Better Military Product Designs, Faster Rick Battani
Investigation of Airfoil Aeroacoustics due to different Stall Mechanism using Large Eddy Simulation (LES) Voo Keng Soon Vince, Lim Nee Sheng Winson , Tan Chun Hern
Fluid Structure Interaction in STAR-CCM+ Alan Mueller
Integrated modeling for Aerospace Powerplant system assessments Borja Díaz Soto
Experimental Validation of STAR-CCM+ for Liquid Container Slosh Dynamics Brandon Marsell
CFD and wind tunnel testing Todd Leighton
Workshop (II): Best Practices for Aerospace Aerodynamics Modeling Peter Ewing
Aerospace Applications & Case Studies Deryl Snyder
Diminishing Test Resources and Aerodynamic Data Base Generation Seungki Ahn
FSI Demonstration Hyun Kim
Rotorcraft Design & Analysis Capabilities in STAR-CCM+ Ritu Marpu
Computational Aeroelasticity : A Key Enabling Technology for the Design of Next-Generation Aircraft
Drag Prediction of Two Production Rotor Hub Geometries Charles R. Berezin
Co-Simulation with CRTech Thermal Desktop & STAR-CCM+® CRTech
Drag and Lift Validation of Wing Profiles Martin van Staden
柴油机SCR喷雾及排气管路CFD计算
Best Practices Workshop (II): Volume Meshing Kynan Maley

Pages