Technical Library

Some articles have copyright restrictions,
in order to download these you will be redirected to the copyright holder's website.

 
Name Author(s) Datesort descending
基于STAR-CCM+的FAD组件润滑仿真分析
A Numerical Approach to Thermal Management of Dynamic Driving Cycles Mario Disch (Daimler AG), Thomas Walker (CD-adapco)
多成分燃料噴霧の蒸発過程のモデル解析 千田 二郎先生
基于纯电动车空气动力学性能研究
The Increasing Demand for Virtual Prototypes in Civil Engineering Erwin Schnell
Key STAR Technologies: Dispersed Multiphase Flow & Liquid Film Modeling David Gosman
某乘用车乘员舱吹脚模式流场仿真与改进
New features of STAR-CCM+7.02 Jun Ho Choi
汽车三元催化器流动均匀性的优化
Thermal Soak Simulation of Scania’s Eu6 Silencer using Co-simulation Ayyoob Zarmehri
A new meshing methodology for faster simulation of a Body-In-White dipping process Madhusudhan Devanathan
某柴油机中冷器进气腔的仿真优化设计
Practical CFD-DEM Software Needs & Issues in Agricultural Crop Flow Modeling Robert V. Shannon Jr.
Formula SAEにおける空力開発について ~STAR‐CCM+を用いた解析事例~ 能島 良輝様
发动机冷却风扇气动噪声仿真分析
Optimizing Jets for Active Wake Control of Ground Vehicles Domenic Barsotti
Simulating Systems in Ground Vehicle Design Frederick J. Ross
汽车空调性能研究 郑鑫
Vehicle Thermal Reliability Fabiano Bet
Multidisciplinary Design Exploration in Ground Vehicle Design Frederick J. Ross
Simulating Systems in Ground Vehicle Design Frederick J. Ross
基于流固耦合的汽油机整机温度场的仿真分析
Simulation of a vane cell oil pump Thomas Fischer, Ulrich Stubbemann, Jan Fischer, Kai Fellmann
发动机EGR均匀性1D3D耦合仿真优化
Virtual Temperature Cycle Test (TCT) for Validation of Indirect Charge Air Coolers & Exhaust Gas Recirculation Coolers Georgios Apostolopoulos, Rainer Stauch, C. Marola, F. Schmidt, J. Schlottke, Wolfram Kühnel
基于starccm+的发动机流体分析自动化开发
An Innovative Transient Post-Processing Approach for a Full Car Thermal Validation Study Yves-Marie Lefebvre, Lester DeLeon, Sachin Badarayani
内燃機関 - 筒内計算ロードマップ Richard Johns
某轿车发动机舱局部热害仿真分析研究
Automated Thermal Underhood thermal Simulation Enric Aramburu
STAR-CCM+の流体騒音解析の概要と事例紹介 高橋 雄太
某乘用车除霜风道CFD分析及结构优化
Customizing STAR-CCM+ for seamless Integration to PLM Tom Walker
發動機排氣歧管熱結構疲勞分析
Where The Heat Goes - Thermal Analysis of Internal Combustion Engines Marcus Ende, Carsten Skrobanek, Christian Schramm, Rene Paessler, Carolus Gruenig
SI-ICE燃焼モデルの最新機能強化:ラージEGR率と希薄燃焼下での層状燃焼への適用 Marc Zellat
Migration from STAR-CD to STAR-CCM+ at the BMW Group Arne Lehmann
某共轨喷油器的低压油路CFD分析 徐世龙
Racecar Rear-Wing Setup Optimization via 2D CFD Simulations Faïssal Fdil
发动机曲轴箱通风系统瞬态CFD分析
Design Competition Team List
Electroplating Chris Lueth
基于STAR-CCM+的某重型车挡风玻璃除霜分析
Advanced Combustion Modeling with DARS Fabian Mauss
The R/C Bullet: Guinness Journey of the Fastest Battery-Powered, Remote-Controlled Car in the World Nic Case, Prashanth Shankara
STAR-CCM+ Custom Apps Make Productive Experiences 酒井 勇
汽车空气动力学研究组-汽车气动外形减阻优化设计 张英朝
Using STAR-CCM+ for Catalyst Utilization Analysis Alex Leong, Serdar Guryuva
滚流对直喷汽油机缸内混合气的影响
Heat Transfer Through an Axial Fan with a Non-Homogeneous Temperature Source Markus Riesterer, Bettina Frohnapfel, (Karlsruhe Institute of Technology), Thomas Binner, Heinrich Reisterer, (Daimler AG)

Pages