Technical Library

Some articles have copyright restrictions,
in order to download these you will be redirected to the copyright holder's website.

 
Name Author(s) Datesort ascending
Improvement of Heat Transfer Coefficients in a Shell and Helical Tube Heat Exchanger Using Water/Al2o3 Nanofluid Vinodkumar , Kiran Voonna, T.K. Tharakeshwar June 1, 2015
STUDY OF GAS-SOLID FLUIDIZED BED - TUNING SYAMLAL O’BRIEN DRAG MODEL GAURAV KATHURIA,, ADITYA KARNIK, MOHIT TANDON May 19, 2015
COUPLING OF 3D NUMERICAL SOLUTION METHOD BASED ON NAVIER-STOKES EQUATIONS WITH SOLUTIONS BASED ON SIMPLER THEORIES Sven Enger, Milovan Perić, Henrique Monteiro November 23, 2014
Numerical Investigation of the Effect of Bed Height on Minimum Fluidization Velocity of Cylindrical Fluidized Bed Ajay M R July 31, 2013
Numerische Strömungssimulation zur Berechnung der Verweilzeitverteilung in einem Biogasreaktor Christian Bock November 28, 2011
Simulation der Stromungspro Carsten Futterer October 30, 2011
Numerische Simulation der Hydrodynamik, des Stoffumsatzes und der chemischen Reaktion in einem T-förmigen Mikromischer Fabian Huck September 16, 2011
Experimental and Numerical Analysis of Transport in Saturated Heterogeneous Media S. J. Harrington June 3, 2010
Application of computational fluid dynamics to spray drying Simon LO July 5, 2005
In-Cylinder Engine Calculations: New Features & Upcoming Capabilities Richard Johns
Emulating the Direct Blister Furnace Process with Coal Combustion Bennie Henning
Better Reactors Grow from Better Simulations Emilio Baglietto
Analysis & Modeling in CFD of the Mixing in an Industrial Anaerobic Membrane Bioreactor Jorge López
New features of STAR-CCM+7.02 Jun Ho Choi
Shape Optimization of a Top Entry Mixer - A Case Study using CAESES / STAR-CCM+ Mike Saroch
STAR-CCM+ DEMモデル - 変形、破損や固体の流れのシミュレーション Oleh Baran
Modelling Multiphase Flows in the Chemical and Process Industry Simon Lo
Combustion Modeling for Industrial Systems Niveditha Krishnamoorthy
Key STAR Technologies: Dispersed Multiphase Flow & Liquid Film Modeling David Gosman
STAR-CCM+® Usage for Sorbent Injection Optimization Tyler Derritt
Best Practice: Multiphase Flows Xiao Hu
Multiphase Flow Models in STAR-CCM+ Simon Lo
Reacting flow modeling and applications in STAR-CCM+ Yongzhe Zhang
Using STAR-CCM+ for Research & Teaching at the Chair of Chemical & Process Engineering Matthias Kraume, Gregor Wehinger, Thomas Eppinger
STAR-CCM+における混相モデリングの先進性 Ravindra Aglave
Key STAR Technologies: Dispersed Multiphase Flow & Liquid Film Modeling David Gosman
Modeling an Axisymmetric Perforated Brick Catalyst Ahmad Mat Yamin
Reacting Flow Applications in STAR-CCM+ Rajesh Rawat
CFD Lagrangian Multiphase Simulation Applied to Dust Explosion Characterization Hugo Pineda
Multiphase flow I (Eulerian two phase flow and Boiling) Prof. Simon Lo
Spatially Resolved Simulations of Heterogeneous Dry Reforming of Methane in Fixed-Bed Reactors Thomas Eppinger (CD-adapco), Matthias Kraume (Technische Universität Berlin)
Complex chemistry with DARS Karin Fröjd
STAR-CCM+ in the Process Industry Mark Farrall
DEM Solutions for Oil & Gas and Chemical Industries Oleh Baran
Multi-Fuel Combustion & Detailed Chemistry Reaction Models Rajesh Rawat
Integrating STAR-CCM+ with a Systems Analysis Code for Nuclear Reactor Safety Simulations Justin W. Thomas
Reacting Flow Applications in STAR-CCM+ Rajesh Rawat
柴油机SCR喷雾及排气管路CFD计算
Modeling industrial multiphase flows with STAR-CCM+ Simon Lo, Dominik Kubicki
CD-adapco's vision of STAR-CCM+ in Chemical Industry Ravindra Aglave
STAR-CCM+ 反応モデルと適用事例 Yongzhe Zhang
Multiphase Flow Models in STAR-CCM+ Simon Lo
Examining the Cost Return Ratio for CFD in the Gas, Oil and Chemical Industries Mike Porter, President
Overview & Perspectives for Internal Combustion Engine using STAR-CD Marc Zellat
Eulerian Model Performance in CFD Calculating the Drag Coefficient from Drift-Flux Model for Gas-liquid Two-phase Flow in Vertical Pipes Hugo Pineda
Multiphase flow II (Applications & Theoretical background of DEM) Prof. Simon Lo
Shape Optimization of a Top Entry Mixer - A Case Study using CAESES / STAR-CCM+ Mike Saroch
Multiphase Interactions: Which, When, Why, How? Ravindra Aglave
Application of Direct Quadrature Method of Moments in Multiphase Flows using STAR-CCM+ John Parra-Alvarez
Reaction Furnace Flame Analysis Mike Porter

Pages