Technical Library | CD-adapco

Technical Library

Some articles have copyright restrictions,
in order to download these you will be redirected to the copyright holder's website.

 
Name Author(s) Datesort ascending
Diminishing Test Resources and Aerodynamic Data Base Generation Seungki Ahn
Thermal & Electrochemical Simulation of Battery Pack Systems Gaëtan Damblanc
Upwind Sailing in a Rough Sea Giovanni Lombardi
Application of Direct Quadrature Method of Moments in Multiphase Flows using STAR-CCM+ John Parra-Alvarez
Continuing Cooling Performance Investigation of a Rear Mounted Cooling Package for Heavy Vehicles Lisa Larsson, Lennart Löfdahl, Eric Dahl, Torbjörn Wiklund
Higher Gas Turbine Operation Flexibility by Improved Diffuser Vanes of a Radial Compressor Anis Ayed
Virtual Temperature Cycle Test (TCT) for Validation of Indirect Charge Air Coolers & Exhaust Gas Recirculation Coolers Georgios Apostolopoulos, Rainer Stauch, C. Marola, F. Schmidt, J. Schlottke, Wolfram Kühnel
Customizing STAR-CCM+ to Automate a Virtual Port Flow Test Thomas Walker
Aspects of Industrial Flow Prediction using LES David Gosman
Multiphase Flow Models in STAR-CCM+ Simon Lo
STAR-CCM+ 4.06 New Features Jean-Claude Ercolanelli
STAR-CCM+: NACA0012 Flow and Aero-Acoustics Analysis James Ruiz
Solution History and Solar Calculator Cho Jin Young
Where The Heat Goes - Thermal Analysis of Internal Combustion Engines Marcus Ende, Carsten Skrobanek, Christian Schramm, Rene Paessler, Carolus Gruenig
Integrierte 3D-Strömungssimulation in der Gebäudetechnik und im Brandschutz Erwin Schnell
Aeroacoustics and trends towards aero-vibroacoustics Fred Mendonca
In-Cylinder Engine Calculations: New Features & Upcoming Capabilities Richard Johns
Use of Numerical Modeling to Improve the Performance of Night Ventilation Hayder. M. Khan, Gregory. F. Lane-Serff, Jonathan Dewsbury
Fire and Smoke Modeling in Tunnels and Emergency Stations Peter Bailey
Best Practices Workshop (I): Surface Meshing Peter Ewing
Fluid Structure Interaction in STAR-CCM+ Alan Mueller
A CFD study of heating steel bar end face to allow machinability Eike Runschke, Zeljko Cancarevic, Axel Stüber, Henning Schliephake
From 40 Hours to 15 Minutes, 15 Years of Experience with CFD Norbert Bulten
Virtual Manufacturing Empowers Digital Product Development - Case Study E-Coat Simulation Frank Pfluger, Klaus Wechsler
An Innovative Transient Post-Processing Approach for a Full Car Thermal Validation Study Yves-Marie Lefebvre, Lester DeLeon, Sachin Badarayani
The Future of Energy Supply and Demand A. Michael Schaal, Director, Oil and Gas Division
Vehicle Applications using STAR-CCM+ Fred Ross
Overset Grids in STAR-CCM+: Methodology, Applications & Future Developments Eberhard Schreck, Milovan Peric
Challenges in spray dryer modeling Alfred Jongsma
From Subsea to Separator: Simulation for the Oil & Gas Industry Matt Straw
Numerical Simulation of Flow Field Formed in Water-Pump Sump Annie-Claude Bayeul-Lainé, Gérard Bois, Abir Issa
Preliminary results with ECFM-3Z LES Stefano Paltrinieri, Stefano Fontanesi
CFD Simulations in Support to the MYRRHA Design Maria Manuela Profir, Vincent Moreau
Einsatz von CFD zur Neuentwicklung und Optimierung von Schiffsantrieben - 10 Jahre Erfahrungen bei VOITH Dr. Dirk Jürgens
Modeling of gasoline using ECFM-3Z with STAR-CD v4 : Investigation on spark modeling with AKTIM and Knock Marc Zellat
Best Practices Overview for Electronics Thermal Simulations Ruben Bons
Multi-Disciplinary Problem Based Learning in Computational Fluid Dynamics Reza Fakhrai, Bahram Saadatfar
Outdoor Thermal Comfort Greg Thomas
Discrete Element Method (DEM) in STAR-CCM+ Oleh Baran
Development and validation of a Thermal Simulation Model for Li-ion batteries in HEVs/PEVs presented by Steve Hartridge
Solar Air Heater Wizard: Automating CFD Yannick Sirois, Geneviève Dutil
BEHR Fan Modeling Approach: From Transient Fan Blade Development to System Optimization with Underhood Simulation F. Brotz, F. Guilbaud, A. Kleber, C. Marola
Fluid Distribution & Investigation of Heat Transfer on a New Type of Solar Flat-Plate Collector Pascal Leibbrandt & Kevin Weber
Auxillary Inlet Design Kevin Neitzel
Aeroacoustics in STAR-CCM+ (only Busan) Dr. Fred Mendonca
Empirical Battery Models Robert Spotnitz
Modeling of the flow in a water turbine of a hydroelectric generator V.A. Folomeev, F.A. Pletenev, V.P. Bashurin
Advanced Turbomachinery Simulation using STAR-CCM+ Chad Custer
Missile External Aerodynamics Using STAR-CCM+ D. Snyder
Urea‐injection and ‐preparation in Diesel applications Simon Fischer

Pages