Technical Library

Some articles have copyright restrictions,
in order to download these you will be redirected to the copyright holder's website.

Name Author(s) Datesort ascending
Fluid Structure Interaction in STAR-CCM+ Alan Mueller
Development of Transient Simulation Methodologies for Underhood Hot Spot Analysis of a Truck Joshua Pryor, Matt Pierce, Eric Fremond, Yanick Michou
The Design & Analysis of a low NPSH Centrifugal Pump Featuring a Radial Inlet & an Axial Inducer using STAR-CCM+ Edward M. Bennett, Travis A. Jonas
Discrete Element Method (DEM) in STAR-CCM+ Oleh Baran
STAR-CCM+ and SPEED for electric machines cooling analysis Stefan Holst
Thermal & Electrochemical Simulation of Battery Pack Systems Steve Hartridge
Aeroharmony: The Development of Cross-Flow Fan Propulsion Joseph Kummer
High Performance Computing STAR-CCM+ Simulations of Industrial Air-Assisted Flare Including Experimental Apparatus Michal Hradisky, Philip J. Smith
From 40 Hours to 15 Minutes, 15 Years of Experience with CFD Norbert Bulten
Aeroacoustics Simulations for the Aerospace Industry Fred Mendonça , Deborah Eppel
設計探査 - より良い設計をより速く見つけ出す Bob Ryan
Validation of CFD-BWR , a new two-phase computational fluid dynamic model for boiling water reactor analysis V.Ustinenko, M.Samigulin, A.Ioilev, S.Lo, A.Tentner, A.Lychagin, A.Razin, V.Girin, Ye.Vanyukov
Engine Assembly Thermal Simulation using the Cycle Average Tool Michael Weaver
Vehicle Applications using STAR-CCM+ Fred Ross
Multiphase Flow Models in STAR-CCM+ Simon Lo
Thermisch behaglich durch CFD Conrad Völker
Coupling of STAR-CCM+ to Other Theoretical or Numerical Solutions Milovan Perić
Preliminary results with ECFM-3Z LES Stefano Paltrinieri, Stefano Fontanesi
Integrated modeling for Aerospace Powerplant system assessments Borja Díaz Soto
SPEED, the Tool for Designing Electrical Machines Markus Anders
熱流体シミュレーション予測の進展と挑戦 Emilio Baglietto先生
Numerical Evaluation of Averaging BDFT(bidirectional flow tube) Flow meter on Applicability in the Fouling Condition Jong-Pil Park
CFD simulation of a burner for SYNGAS characterization : preliminary results and experimental validation M. D'Amico, U. Desideri, F. Fantozzi
Transfer Function Method for Aeroacoustic Noise Predictions Jonathan Scott
Coupled Simulation of Flow & Body Motion using Overset Grids Eberhard Schreck, Milovan Perić
A CFD study of heating steel bar end face to allow machinability Eike Runschke, Zeljko Cancarevic, Axel Stüber, Henning Schliephake
Numerical Simulation of Unsteady Interaction of Hot Streams with HPT Rotor Blades using Harmonic Balance Method Implemented in STAR-CCM+ A.I. Iakunin, N.B. Kuznetcov, A.E. Tcvetaev
Using CFD to Wring Out Energy Efficiency in Laboratory Settings Scott Reynolds
Spatially Resolved Simulations of Heterogeneous Dry Reforming of Methane in Fixed-Bed Reactors Thomas Eppinger (CD-adapco), Matthias Kraume (Technische Universität Berlin)
FSI Simulation of Pulsatile Blood Flow in Aortic Arch Damon Afkari
CDA Workshop - Physical & Numerical Hydraulic Modeling Yannick Sirois
Reduction of noise in screw compressors Elvedin Mujić Ahmed Kovačević, Nikola Stošić, Ian K Smith
Meeting the Electrification Challenge with Simulation Steve Hartridge
Aeroacoustics in STAR-CCM+ (only Busan) Dr. Fred Mendonca
Solution for Casting Simulations 佐方 宗樹
Profile optimization of the charge air distribution by means of the CFD simulations of the fluid flow and heat transfer I.V. Shevchuk
CFD Simulation of a High Tech Operating Room Franz Magerl
Challenges in spray dryer modeling Alfred Jongsma
Wave Structure Interaction Simulated By STAR CCM+ M. Bozorgnia, Jiin-Jen Lee
Complex chemistry with DARS Karin Fröjd
Automated Exhaust Line Simulation Yohann Perrot
Continuing Challenges to CFD Software in Aeroacoustic Fred Mendonça
Validation of STAR-CCM+ for External Aerodynamics in the Aerospace Industry CD-adapco
Vehicle Applications using STAR-CCM+ Fred Ross
Development and validation of a Thermal Simulation Model for Li-ion batteries in HEVs/PEVs presented by Steve Hartridge
Fluid-Based Topology Optimization of an EGR Flowsplitter Jens Iseler
Conference overview Bill Clark, Sr Vice President
Rotorcraft Design & Analysis Capabilities in STAR-CCM+ Ritu Marpu
Aircraft Damping Derivative Estimation Using STAR‐CCM+ Angelo Lerro