Technical Library

Some articles have copyright restrictions,
in order to download these you will be redirected to the copyright holder's website.

 
Namesort descending Author(s) Date
Simulation of Free Surface Flows with STAR-CCM+: Current Status & Future Developments Samir Muzaferija, Milovan Peric
Simulation of Free-Surface Flows with STAR-CCM+ Milovan Perić
Simulation of High Pressure Die Casting (HPDC) via STAR-Cast Romuald Laqua
Simulation of Lifeboat Launching Under Storm Conditions H. J. Mørch, S. Enger, M. Perić, E. Schreck June 10, 2008
Simulation of manufacturing processes Tom Marinaccio
Simulation of noise in HVAC ducts Karamjit Sandhu
Simulation of Open Channel Turbulent Flow Over Bridge Decks and Formation of Scour Hole Beneath the Bridge Under Flooding Conditions Bishwadipa Adhikary, Pradip Majumdar, Milivoje Kostic, Steven A. Lottes November 13, 2009
Simulation of Particulate Solids Processing using Discrete Element Method Oleh Baran
Simulation of Selective Catalytic Reduction using DARS 1D Tool Karin Froejd
Simulation of Sloshing Loads on Moving Tanks M. Perić, T.Zorn June 12, 2005
Simulation of the Effect of Recirculated Gases on Ignition Delay During Cold Starting of a Direct Injection Diesel Engine R. Rofail, N. Henein April 12, 2011
Simulation of the Hydrogen Fueling Process David Wenger, Lilla Puskas
Simulation of the Interior Cabin Warm-Up & Cool Down using CFD Karamjit Sandhu
Simulation of the mixture preparation for an SI Engines using multi-component fuels Michael Heiss, Thomas Lauer
Simulation of the Windscreen Defrost Performance Dr Karamjit Sandhu
Simulation of Turbulent Lifted Flames Using a Partially-Premixed Coherent Flame Model (PCFM) R. Rawat, Y. Zhang June 9, 2008
Simulation of two-phase flow in a hydraulic cyclone tank Glenn Tørå
SIMULATION OF UNSTEADY TURBOMACHINERY FLOWS USING AN IMPLICITLY COUPLED NONLINEAR HARMONIC BALANCE METHOD Jonathan M. Weiss, Venkataramanan Subramanian, Kenneth C. Hall June 6, 2011
Simulation of VAWT for wake effects Xiaojian Huang
Simulation of Wave Impact Effects & Body Motion in Waves using Overset Grids in STAR-CCM+ Milovan Perić
Simultaneous Evaluation on Aerodynamics and Air-cooling Performances for Motorcycle using CFD Analysis T. Shimizu, T. Abe, Y. Sunayama, S. Watanabe, E. Nakamura November 3, 2009
Slurry transport in a pipeline – Comparison of CFD and DEM models Dominik KUBICKI and Simon LO December 10, 2012
Software development information of STAR-CCM+ BSM v6.04/v6.06 Steve Hartridge
Solar Air Heater Wizard: Automating CFD Yannick Sirois, Geneviève Dutil
Solution for Casting Simulations 佐方 宗樹
Solution History and Solar Calculator Cho Jin Young
Spatially Resolved Simulations of Heterogeneous Dry Reforming of Methane in Fixed-Bed Reactors Thomas Eppinger (CD-adapco), Matthias Kraume (Technische Universität Berlin)
Spatially Resolved Simulations of Heterogeneous Dry Reforming of Methane in Fixed-Bed Reactors Thomas Eppinger (CD-adapco) Matthias Kraume (Technische Universität Berlin)
SPEED, the Tool for Designing Electrical Machines Markus Anders
SPEED: Software for electric machine design and analysis Markus Anders
SPEEDを活用した設計事例の紹介 (設計の理想と現実) 大坪 浩二様
Spray Characteristics & Simulating Flash Boiling Process 松村 恵理子様
STAR-CCM+ / ACTRAN for Computational Aero-Acoustics Yves Detandt, Marie Cabrol, Romain Leneveu, Diego D’Udekem, Fred Mendonca
STAR-CCM+ 4.06 New Features Jean-Claude Ercolanelli
STAR-CCM+ an Invaluable Tool for Coal Fired Power Plant Design Optimisation Ignus le Roux, Warwick Ham
STAR-CCM+ and SPEED for electric machine cooling analysis Dr. Markus Anders, Dr. Stefan Holst June 26, 2012
STAR-CCM+ and SPEED for electric machines cooling analysis Stefan Holst
STAR-CCM+ and the Orion Launch Abort Vehicle J. Melton September 30, 2009
STAR-CCM+ Boiling Model Validation Dr. Emilio Baglietto November 1, 2010
STAR-CCM+ Capabilities for Aerospace & Defense Stephen McIlwain
STAR-CCM+ Capabilities for Aerospace & Defense Deryl Snyder
STAR-CCM+ captures the acoustics buried in turbulence Gary Yu, Martin Timmins, Mario Ciaffarafa
STAR-CCM+ Custom Apps Make Productive Experiences 酒井 勇
STAR-CCM+ DEMモデル - 変形、破損や固体の流れのシミュレーション Oleh Baran
STAR-CCM+ DFBI in Naval Applications Minyee Jiang
STAR-CCM+ High Performance Computing Simulations of Oil Shale Retorting System Using Co-Simulation Michal Hradisky, Philip J. Smith, Alan K. Burnham
STAR-CCM+ hypersonic validation of a 70° Sweep Slab Nathan Richardson
STAR-CCM+ in the Process Industry Mark Farrall
STAR-CCM+ in your Workflow Bill Jester
STAR-CCM+ Meshing Aly Khawaja, Shigetoshi Maeda, Kuninori Masushige

Pages