Technical Library

Some articles have copyright restrictions,
in order to download these you will be redirected to the copyright holder's website.

 
Name Author(s) Datesort ascending
Managing form, function and process: The aerodynamic development of the 2011 Ford Ranger Global Compact Pick-Up with STAR-CCM+ Robert Carstairs, Neil Lewington, Thorsten Maertens
A Combined Electromagnetic and Thermal Approach to the Design of Electrical Machines D. G. Dorrell, M. I. McGlip, M. I. McGlip
Advances in Simulation for Marine And Offshore Applications Milovan Perić
The Validation of Fluid-Elastic Instabilities in a Flexible Rod Bundle using STAR-CCM+ coupled to Abaqus Alan Mueller
Towards the Direct Numerical Simulation of a Nuclear Pebble Bed Flow Afaque Shams
Conjugate Heat Transfer (CHT) Simulation with STAR-CCM+ Tom Marinaccio
A numerical method of modeling oil jet piston cooling
A CFD Study of Particle-Laden Flow of a Tundish Water-Model Eike Runschke, Zeljko Cancarevic, Henning Schliephake
Surface preparation and meshing in STAR-CCM+ Sun Lee
Aeroacoustics Simulations for the Aerospace Industry Fred Mendonça , Deborah Eppel
Thermal simulation of IGBTs used in hybrid-electric vehicles Ruben Bons
Absicherung der thermischen Betriebssicherheit von PKWs mit STAR-CCM+ Fabiano Bet
Lid-Driven Cavity Flow
The Increasing Demand for Virtual Prototypes in Civil Engineering Erwin Schnell
Prediction of Resistance of Floating Vessels D. Jürgens, M. Palm, M. Perić, E. Schreck
Best Practices Workshop (III): Adjoint Solver
Aerodynamic Optimization of Chalmers Formula Student Vehicle Athanasios Tzanakis
Analysis of two-phase flows in pipes and subchannels under high pressure N. Alleborn, R. Reinders, S. Lo, A. Splawski
Analysis of the Coffee Roasting Process under Actual Operating Conditions Stefano Farina, Massimo Milani, Luca Montorsi
The Meaning and Significance of Heat Transfer Coefficient Alan Mueller
Information Gain through Validation with Uncertainty Quantification (V/UQ) Philip J. Smith
Vehicle Thermal Management Simulation Scott Shurin
DARS SRM as Combustion Model for Engine Concept Development Arne Andersson
Experimental Correlation of CFD Results on the Formula 3 Christophe Perrin
Computational Fluid Dynamics for Reactor Design & Safety-Related Applications Emilio Baglietto様
Modelling of breakup and coalescence in vertical bubbly two-phase flows Simon Lo, Dongsheng Zhang
Heat Transfer Through an Axial Fan with a Non-Homogeneous Temperature Source Markus Riesterer, Bettina Frohnapfel, (Karlsruhe Institute of Technology), Thomas Binner, Heinrich Reisterer, (Daimler AG)
Achieving Good Natural Ventilation through the Use of High Performance Computer Simulations - Singapore Case Studies Po Woei Ken
Current progress in DARS model development for CFD Harry Lehtiniemi
Optimization of a Dual-Fuel Low-NOx Combustion System for a Tangentially-Fired Utility Boiler Operating at a High Elevation Francois McKenty, Senior CFD Engineer
Integrated Meshing in STAR-CCM+ Aly Khawaja
Emulating the Direct Blister Furnace Process with Coal Combustion Bennie Henning
STAR-CCM+ Capabilities for Aerospace & Defense Deryl Snyder
Simulation of Free-Surface Flows with STAR-CCM+ Milovan Perić
A First Contact with STAR-CCM+: Comparing Analytical & Finite Volume solutions with STAR-CCM+ Simulations Michael Heyer
Simulation of two-phase flow in a hydraulic cyclone tank Glenn Tørå
Accurate and Efficient Turbomachinery Simulation Chad Custer
Increasing Downforce on a LeMans Prototype Jean-Philippe Pelaprat
Thermal Simulation of LED-Powered Luminaire with Coupled Electrical Circuit Analysis Pier Angelo
0D/1D after-treatment modeling with DARS Fabian Mauss
Success of STAR-CCM+ Application in the Design Process of Modern Gas Turbine Moritz Norbert様
Fast Reactor Subassembly Design Modifications for Increasing Electricity Generation Efficiency R. Wigeland, K. D. Hamman
Analysis of the Lubrication System in a High Pressure Piston Water Pump Davide Bottazzi, D. Galloni, M. Milani, L. Montorsi
CD-adapco Product Strategy & Roadmap Jean-Claude Ercolanelli
Sunburned products: Numerical aging caused by sun exposition Axel Müller, Teodora Vatahska
Development of an Ice Breaking Patrol Ship: A Look at Hull Form Design and Heli-deck Aerodynamic Dan Vyselaar
STAR-CCM+ Simulations of In-Situ Thermal Treatment of Oil-Shale Michal Hradisky
The Advantage of Synergy in Civil Engineering Erwin G. Schnell
Battery Modeling Solutions Gaetan Damblanc
Virtual Prototyping at BMW Group. F. Christel

Pages