Technical Library

Some articles have copyright restrictions,
in order to download these you will be redirected to the copyright holder's website.

Namesort descending Author(s) Date
Sunburned products: Numerical aging caused by sun exposition Axel Müller, Teodora Vatahska
Supersonic Flow Over a Flat Plate CD-adapco June 1, 2011
Surface Heterogeneity on Hemispheres-in-Cell Model Yields All Experimentally-Observed Non-Straining Colloid Retention Mechanisms in Porous Media in the Presence of Energy Barriers Huilian Ma, Eddy Pazmino, William P. Johnson November 1, 2011
Surface preparation and meshing in STAR-CCM+ Sun Lee
Surface-To-Surface Radiation in a Cylindrical Hole CD-adapco June 1, 2011
Systems Level CFD Simulations of Large Power Density Electronics Packages Using K-Core Heat Exchanger/Cold Plate Assembly Kevin R. Anderson
Teaching STAR-CCM+ in the University of Southampton Zheng-Tong Xie
Technical Support for Engineering Success 山西 伸宏
Technology Review: Modeling & Simulation for Biomedical Device Design Kristian Debus
The Advantage of Synergy in Civil Engineering Erwin G. Schnell
The application of CFD at Heerema Marine Contractors Harald Ottens, Alessio Pistidda
The Design & Analysis of a low NPSH Centrifugal Pump Featuring a Radial Inlet & an Axial Inducer using STAR-CCM+ Edward M. Bennett, Travis A. Jonas
The effect of in-plane arterial curvature on blood flow and oxygen transport in arterio-venous fistulae F. Iori , L. Grechy, R. W. Corbett, W. Gedroyc, N. Duncan, C. G. Caro, P. E. Vincent March 17, 2015
The effect of serpentine flow-field designs on PEM fuel cell performance D.H. Jeon, S. Greenway, S. Shimpalee, J.W. Van Zee February 1, 2008
The Effects of Injection Timing and Piston Bowl Shape on PHCCI Combustion with Split injections Sangyul Lee, Hoimyoung Choi, Jaewoo Chung December 4, 2010
The Effects of the Planform Shape on Drag Polar Curves of Wings: FSI Analysis Results Matteo Ciabattari
The Future of Energy Supply and Demand A. Michael Schaal, Director, Oil and Gas Division
The Hot Side of the Light Pier Angelo Favarolo
The impact of channel path length on PEMFC flow-field design S. Shimpalee, S. Greenway, J.W. Van Zee September 29, 2006
The importance of correct modeling of bubble size and condensation in prediction of subcooled boiling flows S. Lo, A. Splawski, B.J. Yun
The Increasing Demand for Virtual Prototypes in Civil Engineering Erwin Schnell
The Increasing Demand for Virtual Prototypes in Civil Engineering Erwin Schnell
The InDesA Virtual Test Bench Fabiano Bet, Gerald Seider
The InDesA Virtual Test Facility Environment Dr. Gerald Seider, Dr. Fabiano Bet
The Italian challenge at the Little America’s Cup 2013: Design and analysis method for the C Class prototypes Giuseppe Musca
The Key Role of Simulation in Driving Technology Innovation for Clean and Secure Energy Philip J. Smith, professor and director
The Mars Hopper: an impulse driven, long range, long-lived mobile platform utilizing in-situ Martian resources Steven D. Howe, Robert C. O'Brien, Richard M. Ambrosi, Brian Gross, Jeff Katalenich, Logan Sailer, Mark McKay, John C. Bridges, Nigel P. Bannister December 1, 2011
The Meaning and Significance of Heat Transfer Coefficient Alan Mueller
The New Leader in Computational Wind Energy Engineering: STAR-CCM+ Denis Nagy, VP, Business Development and Director
The repair of a compressor rotor blade airfoil Allan Thomson
The Role of Computational Fluid Dynamic & Aeroacoustic Simulations in Reducing the Noise of a Forward-Curved Blade Radial Fan Manoochehr Darvish, Bastian Tietjen, Stefan Frank
The Role of Simulation in Accelerating Deployment of Clean and Secure Energy Technologies Prof. Philip J. Smith
The State of the Industry, Trends and Opportunities Mark Peters, Vice President and Publisher of Hydrocarbon Processing
The Validation of Fluid-Elastic Instabilities in a Flexible Rod Bundle using STAR-CCM+ coupled to Abaqus Alan Mueller
Thermal & Electrochemical Simulation of Battery Pack Systems Steve Hartridge
Thermal & Electrochemical Simulation of Battery Pack Systems Gaëtan Damblanc
Thermal Analysis & Design Improvement of an Internal Air-Cooled Electric Machine James Dorris
Thermal and Flow Behaviour of the ALICE Muon Trigger Detector Antonio Romanazzi, Davide Maglio
Thermal Cycle CFD Simulation of a Charge Air Cooler Madhu Vellakal
Thermal Fluid-Structure Analysis of an Optical Device Including Radiation and Conduction Timo Laufer
Thermal Management of a Li-ion Battery in a Hybrid Passenger Car within the Development Process Florence Michel
Thermal Management of a Turbocharger for Unsteady Operation Dr. Fabiano Bet
Thermal Management of Electric Motor by STAR-CCM+, SPEED & JMAG 佐藤 誠
Thermal Modeling of NUHOMS HSM-15 and HSM-1 Storage Modules at Calvert Cliffs Nuclear Power Station ISFSI SR Suffield, JM Cuta, JA Fort, BA Collins,HE Adkins and ER Siciliano October 1, 2012
Thermal Simulation of an Exhaust Manifold in a High Performance Diesel Engine Christian Krenn
Thermal simulation of IGBTs used in hybrid-electric vehicles Ruben Bons
Thermal Simulation of LED-Powered Luminaire with Coupled Electrical Circuit Analysis Pier Angelo
Thermal Simulation of the NASA GLACIER Vacuum Jacket Brandon Kirkland January 29, 2012
Thermal Soak Simulation of Scania’s Eu6 Silencer using Co-simulation Ayyoob Zarmehri
Thermal Stress and Thermo-Electrochemical Analysis of a Planar Anode-Supported Solid Oxide Fuel Cell: Effects of Anode Porosity L.K. Chiang, H.C. Liu, Y.H. Shiu, C.H. Lee, R.Y. Lee April 2, 2010