Technical Library | CD-adapco

Technical Library

Some articles have copyright restrictions,
in order to download these you will be redirected to the copyright holder's website.

 
Namesort ascending Author(s) Date
APPLICATION OF MAGNETOCALORIC EFFECT IN THE DESIGN OF EFFICIENT REFRIGERATION SYSTEM S. P. VENDAN, D. DINESH, A. GIRISH January 1, 2009
Application of Direct Quadrature Method of Moments in Multiphase Flows using STAR-CCM+ John Parra-Alvarez
Application of DEM Model of STAR-CCM+ for Granular Flow Through a Pipe Joji Kato
Application of DARS 1D on in-cylinder combustion and aftertreatment Karin Fröjd
Application of computational fluid dynamics to spray drying Simon LO July 5, 2005
Application of CFD in connection with ship design Claus Daniel Simonsen
Annual Building Energy Simulation with STAR-CCM+ Tunc Askan & Martin Kriegel
Aneurysm Inflow-Angle as a Discriminant for Rupture in Sidewall Cerebral Aneurysms Morphometric and Computational Fluid Dynamic Analysis Merih I. Baharoglu, Clemens M. Schirmer, Daniel A. Hoit, Bu-Lang Gao, Adel M. Malek October 1, 2010
Analyzing Local Combustion Environment with a Flamelet Model and Detailed Chemistry Ossi Kaario, Armin Wehrfritz, Martti Larmi, Anders Brink April 1, 2012
Analysis of Void Fraction Distribution and Departure from Nucleate Boiling in Single Subchannel and Bundle Geometries Using Subchannel, System, and Computational Fluid Dynamics Codes Taewan Kim , Victor Petrov, Annalisa Manera, Simon Lo July 20, 2012
Analysis of two-phase flows in pipes and subchannels under high pressure N. Alleborn, R. Reinders, S. Lo, A. Splawski
Analysis of the Lubrication System in a High Pressure Piston Water Pump Davide Bottazzi, D. Galloni, M. Milani, L. Montorsi
ANALYSIS OF THE INTERFACIAL AREA TRANSPORT MODEL FOR INDUSTRIAL 2-PHASE BOILING FLOW APPLICATIONS K. Goodheart, N. Alleborn, A. Chatelain and T. Keheley May 12, 2013
Analysis of the Corrosion Test Process for Heat Exchangers in Corrosion Test Chambers by CFD Simulation Rainer Stauch, F. Brändle, M. Pfitzer, Wolfram Kühnel
Analysis of the Coffee Roasting Process under Actual Operating Conditions Stefano Farina, Massimo Milani, Luca Montorsi
Analysis of the airstream in the ECS roller dynamometer building Stefan Schnörch
Analysis of the 3D Flow & Heat Transfer of the Finned-Tube Bank for Creation Effective Counting Method for Steam Turbines Oil Coolers Yulia S. Bagaeva, N. N. Kortikov
Analysis of Scarfed Shape Effect over Slab Heating Process Jun-Seok Lim , Hyeong-Jin Kim , Hyun-Joon Kim
Analysis of GDL flooding effects on PEMFC performance S. Shimpalee , U. Beuscher, J.W. Van Zee August 1, 2007
Analysis of Flow Induced Noise in a Passenger Car Exhaust System - An Experimental and Numerical Approach D. Rana, F. Regin, M. Makana May 17, 2011
Analysis of Asymmetric Aircraft Aerodynamics Due to an Experimental Wing Glove Fletcher Hartshorn June 27, 2011
An Overview of CFD Applications in Flow Assurances from Well Head to the Platform Simon Lo
An overview of battery simulation Robert Spotnitz
An Investigative Study of Microfluidic Capabilities of STAR-CCM+ Harpreet S. Matharoo July 31, 2013
An Investigation of the Impact of the Proton Exchange Membrane Fuel Cell Flow Field Plate Geometry and Design Using Computational Fluid Dynamic Modeling and Simulation Vijay Edupuganti , Dr. Bevin Daglen February 21, 2012
An integrated approach for simulating diesel engine performance using Direct Injection Stochastic Reactor Model (DI-SRM) Michal Pasternak, Andrea Matrisciano
An Innovative Transient Post-Processing Approach for a Full Car Thermal Validation Study Yves-Marie Lefebvre, Lester DeLeon, Sachin Badarayani
An experimental and modelling approach to the determination of auto-ignition of diesel fuel, dodecane and hexadecane sprays at high pressure Alvaro Diez, Terese Løvås, Roy J. Crookes May 9, 2013
An Aerosol Rapid Compression Machine for Studying Energetic-Nanoparticle-Enhanced Combustion of Liquid Fuels C. Allen, G. Mittal, C.J. Sung, E. Toulson, T. Lee January 1, 2011
Alternative fuels for IC Engines Andreas Kolbeck
Airflow Analysis of a Custom “Green” Air Handling Unit Without a Pre-heater Scott Reynolds
Aircraft Passenger Cabin Thermal Comfort Analysis by Means of Integrated Mono Dimensional/CFD Approach P. Borrelli, A. Romano, D. Cannoletta
Aircraft Passenger Cabin Thermal Comfort Analysis D. Cannoletta
Aircraft Damping Derivatives Estimation Using STAR-CCM+ A. Lerro, M. Visone
Aircraft Damping Derivative Estimation Using STAR‐CCM+ Angelo Lerro
After treatment :SCR modeling using STAR-CCM+ Richard Johns
Aerospace Applications & Case Studies Deryl Snyder
Aerospace Applications & Case Studies Deryl Snyder
Aeroharmony: The Development of Cross-Flow Fan Propulsion Joseph Kummer
Aeroelastic Workshop: The Validation of Aeroelastic Simulations using STAR-CCM+ coupled to Abaqus Rafael Ritterbusch
Aerodynamics Performance for Stepped Labyrinth Seals for Gas Turbine Applications Y. Kang, T. S. Kim, S. Y. Kang, H.K. Moon June 14, 2008
Aerodynamics of High-Lift Wings with Ground Effect for Racecars Wael A. Mokhtar April 14, 2008
Aerodynamics of Heavy Vehicles Driving Past a Wall Florian Iser, Raimund A. Almbauer August 18, 2008
Aerodynamic Validation Studies for Space & Defense Applications Kenneth E. Xiques
Aerodynamic performance of racing bicycles and practical considerations for CFD workflows Matthew N. Godo
Aerodynamic Optimization of Chalmers Formula Student Vehicle Athanasios Tzanakis
Aerodynamic Investigation of Gap Treatment- and Chassis Skirts Strategies for a Novel Long-Haul Vehicle Combination Helena Martini, Björn Bergqvist, Linus Hjelm, Lennart Lofdahl October 2, 2012
Aerodynamic Effects of Roof Deflector and Cab Side Extenders for Truck-Trailer Combinations Helena Martini, Björn Bergqvist, Linus Hjelm, Lennart Löfdahl
Aerodynamic Development of the P09 Time-Trial Bike Helmet Geneviève Dutil, Yannick Sirois
Aerodynamic development of a time-trial bicycle helmet: From CFD to le the eulerian multiphase flow modelthe eulerian multiphase flow modelTour de France Geneviève Dutil, Yannick Sirois

Pages