Technical Library

Some articles have copyright restrictions,
in order to download these you will be redirected to the copyright holder's website.

 
Namesort ascending Author(s) Date
SPEED, the Tool for Designing Electrical Machines Markus Anders
Solution History and Solar Calculator Cho Jin Young
Solar Air Heater Wizard: Automating CFD Yannick Sirois, Geneviève Dutil
Software development information of STAR-CCM+ BSM v6.04/v6.06 Steve Hartridge
Slurry transport in a pipeline – Comparison of CFD and DEM models Dominik KUBICKI and Simon LO December 10, 2012
Simultaneous Evaluation on Aerodynamics and Air-cooling Performances for Motorcycle using CFD Analysis T. Shimizu, T. Abe, Y. Sunayama, S. Watanabe, E. Nakamura November 3, 2009
Simulation of Wave Impact Effects & Body Motion in Waves using Overset Grids in STAR-CCM+ Milovan Perić
Simulation of two-phase flow in a hydraulic cyclone tank Glenn Tørå
Simulation of Turbulent Lifted Flames Using a Partially-Premixed Coherent Flame Model (PCFM) R. Rawat, Y. Zhang June 9, 2008
Simulation of the Windscreen Defrost Performance Dr Karamjit Sandhu
Simulation of the mixture preparation for an SI Engines using multi-component fuels Michael Heiss, Thomas Lauer
Simulation of the Effect of Recirculated Gases on Ignition Delay During Cold Starting of a Direct Injection Diesel Engine R. Rofail, N. Henein April 12, 2011
Simulation of Sloshing Loads on Moving Tanks M. Perić, T.Zorn June 12, 2005
Simulation of Selective Catalytic Reduction using DARS 1D Tool Karin Froejd
Simulation of Open Channel Turbulent Flow Over Bridge Decks and Formation of Scour Hole Beneath the Bridge Under Flooding Conditions Bishwadipa Adhikary, Pradip Majumdar, Milivoje Kostic, Steven A. Lottes November 13, 2009
Simulation of noise in HVAC ducts Karamjit Sandhu
Simulation of manufacturing processes Tom Marinaccio
Simulation of Lifeboat Launching Under Storm Conditions H. J. Mørch, S. Enger, M. Perić, E. Schreck June 10, 2008
Simulation of High Pressure Die Casting (HPDC) via STAR-Cast Romuald Laqua
Simulation of Free-Surface Flows with STAR-CCM+ Milovan Perić
Simulation of Flow Around KCS-Hull S. Enger, M. Perić, R. Perić December 8, 2010
Simulation of engine cooling components within the development of Behr Rainer Stauch
Simulation of centrifugal casting via STAR-Cast Santhanu Jan
Simulation of Acoustics & Turbulence Phenomena in Aerodynamics Applications with STAR-CCM+ Milovan Perić
Simulation of a Vane-type Oil Pump Thomas Fischer, Dr. Ulrich Stubbemann, Jan Fischer, Kai Fellmann
Simulation of a vane cell oil pump Thomas Fischer, Ulrich Stubbemann, Jan Fischer, Kai Fellmann
Simulation of a Sonic Nozzle by a Numerical Code P. Spazzini, O. Caramia September 19, 2007
Simulation Management: A Vision of PLM-to-Simulation Workflow Supported by Customized Software Modules T. Walker, CD-adapco, W. Bauer, Daimler AG February 14, 2012
Simulation for the Oil and Gas Industry Ivar Iverson
Simulation der Stromungspro Carsten Futterer October 30, 2011
Simulating the Blister Tap Hole Concept Design Using Conjugate Heat Transfer Capabilities in STAR-CCM+ B. Henning, F. Marx, D. Hartzenberg, N. Fowler, M. Shapiro
Simulating the Blister Tap Hole Concept Design using CHT Capabilities in STAR-CCM+ Dr. Bennie Henning
Simulated elliptical bioprosthetic valve deformation: Implications for asymmetric transcatheter valve deployment Wei Sun, Kewei Li, Eric Sirois December 1, 2010
Silver Sponsors’ Presentation: SIMULIA – FSI w/ Abaqus & STAR-CCM+ William Ramroth
Shock Absorber Oil Damper Report T.W.
Ship Design Optimization Maurice F. White
Shape optimization of a ship based on CFD simulations Luc Bordier, Fabian Pécot, Riccardo Buiatti, Camille Yvin, Jean-Jacques Maisonneuve
Sensitivity study for the mass transfer at a single droplet A.R. Paschedag, W.H. Piarah, M. Kraume July 1, 2005
Schiffsentwurf auf Basis von Simulationen Karsten Fach
Round Table Discussion: Hardware & Software Trends Driving Simulation for Energy Engineering Media and Industry Experts
Reduction of noise in screw compressors Elvedin Mujić Ahmed Kovačević, Nikola Stošić, Ian K Smith
Recent progress in CFD modelling of multiphase flow in horizontal and near-horizontal pipes Simon Lo, Antonino Tomasello January 1, 2010
Recent Advances in Simulation for Marine Applications Prof. Milovan Peric
Recent & Upcoming Features in STAR-CCM+ for Aerospace Applications Deryl Snyder
Reacting Flow Modeling in STAR-CCM+ Rajesh Rawat
Reacting flow modeling in STAR-CCM+ Rajesh Rawat
Reacting Flow Applications in STAR-CCM+ Rajesh Rawat
Radiative Heat Transfer in Scattering Media Using The Discrete Ordinate Method CD-adapco June 1, 2011
Racing Bike Aerodynamics Matthew Godo
Racing Bike Aerodynamics Matthew Godo

Pages