Technical Library

Some articles have copyright restrictions,
in order to download these you will be redirected to the copyright holder's website.

 
Name Author(s) Datesort descending
Technology Review: Modeling & Simulation for Biomedical Device Design Kristian Debus
Modelling of breakup and coalescence in vertical bubbly two-phase flows Simon Lo, Dongsheng Zhang
Achieving Good Natural Ventilation through the Use of High Performance Computer Simulations - Singapore Case Studies Po Woei Ken
Key STAR Technologies: Dispersed Multiphase Flow & Liquid Film Modeling David Gosman
Current progress in DARS model development for CFD Harry Lehtiniemi
Investigation of Global Regular Wave Loading on a Damaged Ship using CFD Thomas Goatly
Optimization of a Dual-Fuel Low-NOx Combustion System for a Tangentially-Fired Utility Boiler Operating at a High Elevation Francois McKenty, Senior CFD Engineer
Emulating the Direct Blister Furnace Process with Coal Combustion Bennie Henning
Adaptation of STAR-CCM+ Numerical Wave Tank to an Offshore Floater Design Tool A.R.
Simulation of Free-Surface Flows with STAR-CCM+ Milovan Perić
Minimizing the Impact of Wind-Driven Rain on Buildings through the Use of High Performance Computer Simulations Po Woei Ken, Tan Phay Ping, Tan Hwee Sien
Automating the CAE Process with STAR-CCM+ & Optimate Aaron Godfrey
Analysis of two-phase flows in pipes and subchannels under high pressure N. Alleborn, R. Reinders, S. Lo, A. Splawski
The Meaning and Significance of Heat Transfer Coefficient Alan Mueller
STAR-CCM+ Custom Apps Make Productive Experiences Isamu Sakai
0D/1D after-treatment modeling with DARS Fabian Mauss
Battery Design Overview Robert Spotnitz
Fast Reactor Subassembly Design Modifications for Increasing Electricity Generation Efficiency R. Wigeland, K. D. Hamman
CD-adapco Product Strategy & Roadmap Jean-Claude Ercolanelli
Simulating Systems in Ground Vehicle Design Frederick J. Ross
Sunburned products: Numerical aging caused by sun exposition Axel Müller, Teodora Vatahska
Dental Implant Cement Flow Simulations with STAR-CCM+ Sabine Goodwin
Development of an Ice Breaking Patrol Ship: A Look at Hull Form Design and Heli-deck Aerodynamic Dan Vyselaar
The Advantage of Synergy in Civil Engineering Erwin G. Schnell
Steady Flow Over a Backward Facing Step
Virtual Prototyping at BMW Group. F. Christel
Upcoming Electromagnetic Applications with STAR-CCM+ Stefan Holst
Best Practices Workshop (I): Simulation Assistant Petere
Continuing Challenges in Aeroacoustics Fred Mendonça
Aerodynamic performance of racing bicycles and practical considerations for CFD workflows Matthew N. Godo
An Overview of CFD Applications in Flow Assurances from Well Head to the Platform Simon Lo
Simulation of two-phase flow in a hydraulic cyclone tank Glenn Tørå
Shape Optimization of a Top Entry Mixer - A Case Study using CAESES / STAR-CCM+ Mike Saroch
Simulation of the Hydrogen Fueling Process David Wenger, Lilla Puskas
Increasing Downforce on a LeMans Prototype Jean-Philippe Pelaprat
Computational Fluid Dynamics modeling of two phase flow in a boiling water reactor fuel assembly Adrian Tentner, Simon Lo, Andrey Ioilev, Maskhud Samigulin, Vasily Ustinenko
Better Reactors Grow from Better Simulations Emilio Baglietto
Numerical Simulation for Ignitability of Spark Plug Using In-Cylinder Combustion Model Hirotoshi Yoshizaki
STAR-CCM+ captures the acoustics buried in turbulence Gary Yu, Martin Timmins, Mario Ciaffarafa
Simulation of the Interior Cabin Warm-Up & Cool Down using CFD Karamjit Sandhu
Modeling of Battery Systems and Installations Using STAR-CCM+ Richard Johns, Bob Spotnitz
Simulation of the Windscreen Defrost Performance Dr Karamjit Sandhu
Class 8 Tractor Trailer Aerodynamics Dinesh Madugundi
Simulation of a Vane-type Oil Pump Thomas Fischer, Dr. Ulrich Stubbemann, Jan Fischer, Kai Fellmann
Custom Tools – Vehicle Applications Tom Walker
New Applications of STAR-CCM+ in Marine & Off-Shore Engineering & Future Developments Eberhard Schreck, Frank Schäfer, Jaswinder Singh, Milovan Peric
The application of CFD at Heerema Marine Contractors Harald Ottens, Alessio Pistidda
Thermal Soak Simulation of Scania’s Eu6 Silencer using Co-simulation Ayyoob Zarmehri
Kopplung von DEM und CFD zur Simulation von Festbettreaktoren für stark exotherme Reaktionen Kevin Seidler, Thomas Eppinger
Multi-Objective Optimization of a Grease Mechanical Filter using modeFRONTIER & STAR-CCM+ Marco Carriglio, Alberto Clarich

Pages