Technical Library | CD-adapco

Technical Library

Some articles have copyright restrictions,
in order to download these you will be redirected to the copyright holder's website.

 
Namesort ascending Author(s) Date
Simulation of a Hydraulic Cam Phaser Thomas Fischer, Kai Fellmann
Simulation Management: A Vision of PLM-to-Simulation Workflow Supported by Customized Software Modules T. Walker, CD-adapco, W. Bauer, Daimler AG February 14, 2012
Simulation for the Oil and Gas Industry Ivar Iverson
Simulation der Stromungspro Carsten Futterer October 30, 2011
Simulating the Blister Tap Hole Concept Design Using Conjugate Heat Transfer Capabilities in STAR-CCM+ B. Henning, F. Marx, D. Hartzenberg, N. Fowler, M. Shapiro
Simulating the Blister Tap Hole Concept Design using CHT Capabilities in STAR-CCM+ Dr. Bennie Henning
Simulating Systems in Ground Vehicle Design Frederick J. Ross
Simulated elliptical bioprosthetic valve deformation: Implications for asymmetric transcatheter valve deployment Wei Sun, Kewei Li, Eric Sirois December 1, 2010
Silver Sponsors’ Presentation: SIMULIA – FSI w/ Abaqus & STAR-CCM+ William Ramroth
Shock Absorber Oil Damper Report T.W.
Ship Design Optimization Maurice F. White
Shape Optimization of a Top Entry Mixer - A Case Study using CAESES / STAR-CCM+ Mike Saroch
Shape Optimization of a Top Entry Mixer - A Case Study using CAESES / STAR-CCM+ Mike Saroch
Shape optimization of a ship based on CFD simulations Luc Bordier, Fabian Pécot, Riccardo Buiatti, Camille Yvin, Jean-Jacques Maisonneuve
Sensitivity study for the mass transfer at a single droplet A.R. Paschedag, W.H. Piarah, M. Kraume July 1, 2005
Schiffsentwurf auf Basis von Simulationen Karsten Fach
Round Table Discussion: Hardware & Software Trends Driving Simulation for Energy Engineering Media and Industry Experts
Rotorcraft Design & Analysis Capabilities in STAR-CCM+ Ritu Marpu
Reduction of noise in screw compressors Elvedin Mujić Ahmed Kovačević, Nikola Stošić, Ian K Smith
Recent progress in CFD modelling of multiphase flow in horizontal and near-horizontal pipes Simon Lo, Antonino Tomasello January 1, 2010
Recent Advances in Simulation for Marine Applications Prof. Milovan Peric
Recent & Upcoming Features in STAR-CCM+ for Aerospace Applications Deryl Snyder
Reacting flow modeling in STAR-CCM+ Rajesh Rawat
Reacting Flow Modeling in STAR-CCM+ Rajesh Rawat
Reacting Flow Applications in STAR-CCM+ Rajesh Rawat
RANS Simulations of Cavitating Azimuthing Thrusters Norbert Bulten & Maarten Bijlard
Radiative Heat Transfer in Scattering Media Using The Discrete Ordinate Method CD-adapco June 1, 2011
Racing Bike Aerodynamics Matthew Godo
Racing Bike Aerodynamics Matthew Godo
Racecar Rear-Wing Setup Optimization via 2D CFD Simulations Faïssal Fdil
Racecar Front Wing Aerodynamics W. A. Mokhtar, J. Lane December 2, 2008
Pulsatile blood flow-split in aortic arch dissection D. Afkar, F Gabaldon Castillo, J Rodriguez Soler
Progress on Engine LES using STAR-CD David Gosman
Progress in Tools for Turbulence Modelling and Simulation Neil Ashton, Alex, Skillen, Alistair Revell, Dominique Laurence, Sylvain Lardeau
Progress in the Self-Similar Turbulent Flame Premixed Combustion Model V. Moreau December 1, 2010
Programmed Trapping of Individual Bacteria Using Micrometre-Size Sieves M. Kim, B. C. Isenberg, J. Sutin, A. Meller, J. Y. Wong, C. M. Klapperich February 4, 2011
Profiting From CFD Use Mike Porter, President and Principal Engineer
Profile optimization of the charge air distribution by means of the CFD simulations of the fluid flow and heat transfer I.V. Shevchuk
Pressures and Discharges During Operation of a Lock Valve, Physical and Numerical Model Results J. M. Scheffermann, R. L. Stockstill January 1, 2009
Preliminary results with ECFM-3Z LES Stefano Paltrinieri, Stefano Fontanesi
Prediction of transient response for a 25-cm2 PEM fuel cell S. Shimpalee, D. Spuckler, J.W. Van Zee February 13, 2007
Prediction of Resistance of Floating Vessels D. Jürgens, M. Palm, M. Perić, E. Schreck
PREDICTION OF RESISTANCE OF FLOATING VESSELS D Jürgens, M Palm, M Periç, E Schreck
Prediction of Drop Sizes for Liquid–Liquid Systems in Stirred Slim Reactors—Part II: Multi Stage Impellers S. Maass, T. Rehm, M. Kraume April 1, 2011
Prediction of cavitation dynamics in marine applications Iulia Oprea, Norbert Bulten
Prediction of Boiling Water Reactor Assembly Void Distributions Using a Two-Phase Computational Fluid Dynamics Model W. David Pointer, Adrian Tentner, Tanju Sofu, Simon Lo , Andrew Splawski May 11, 2008
Prediction of a subcooled boiling flow with the mechanistic wall boiling and bubble size models B.J. Yun, A. Splawski, S. Lo, C.–H. Song July 23, 2010
Prediction of a subcooled boiling flow with advanced two-phase flow models Byong-Jo Yun, Andrew Splawski, Simon Lo, Chul-Hwa Song May 21, 2013
Predicting water and current distributions in a commercial-size PEMFC S. Shimpalee, S. Greenway, D. Spuckler, J.W. Van Zee a June 8, 2004
Predicting pressure drop in pneumatic conveying using the discrete element modelling approach Vikrant Singh, Simon Lo January 1, 2010

Pages