Technical Library | CD-adapco

Technical Library

Some articles have copyright restrictions,
in order to download these you will be redirected to the copyright holder's website.

 
Namesort ascending Author(s) Date
Racing Bike Aerodynamics Matthew Godo
Racing Bike Aerodynamics Matthew Godo
Racecar Rear-Wing Setup Optimization via 2D CFD Simulations Faïssal Fdil
Racecar Front Wing Aerodynamics W. A. Mokhtar, J. Lane December 2, 2008
Pulsatile blood flow-split in aortic arch dissection D. Afkar, F Gabaldon Castillo, J Rodriguez Soler
Progress on Engine LES using STAR-CD David Gosman
Progress in Tools for Turbulence Modelling and Simulation Neil Ashton, Alex, Skillen, Alistair Revell, Dominique Laurence, Sylvain Lardeau
Progress in the Self-Similar Turbulent Flame Premixed Combustion Model V. Moreau December 1, 2010
Programmed Trapping of Individual Bacteria Using Micrometre-Size Sieves M. Kim, B. C. Isenberg, J. Sutin, A. Meller, J. Y. Wong, C. M. Klapperich February 4, 2011
Profiting From CFD Use Mike Porter, President and Principal Engineer
Profile optimization of the charge air distribution by means of the CFD simulations of the fluid flow and heat transfer I.V. Shevchuk
Pressures and Discharges During Operation of a Lock Valve, Physical and Numerical Model Results J. M. Scheffermann, R. L. Stockstill January 1, 2009
Preliminary results with ECFM-3Z LES Stefano Paltrinieri, Stefano Fontanesi
Prediction of transient response for a 25-cm2 PEM fuel cell S. Shimpalee, D. Spuckler, J.W. Van Zee February 13, 2007
PREDICTION OF RESISTANCE OF FLOATING VESSELS D Jürgens, M Palm, M Periç, E Schreck
Prediction of Resistance of Floating Vessels D. Jürgens, M. Palm, M. Perić, E. Schreck
Prediction of Drop Sizes for Liquid–Liquid Systems in Stirred Slim Reactors—Part II: Multi Stage Impellers S. Maass, T. Rehm, M. Kraume April 1, 2011
Prediction of cavitation dynamics in marine applications Iulia Oprea, Norbert Bulten
Prediction of Boiling Water Reactor Assembly Void Distributions Using a Two-Phase Computational Fluid Dynamics Model W. David Pointer, Adrian Tentner, Tanju Sofu, Simon Lo , Andrew Splawski May 11, 2008
Prediction of a subcooled boiling flow with the mechanistic wall boiling and bubble size models B.J. Yun, A. Splawski, S. Lo, C.–H. Song July 23, 2010
Prediction of a subcooled boiling flow with advanced two-phase flow models Byong-Jo Yun, Andrew Splawski, Simon Lo, Chul-Hwa Song May 21, 2013
Predicting water and current distributions in a commercial-size PEMFC S. Shimpalee, S. Greenway, D. Spuckler, J.W. Van Zee a June 8, 2004
Predicting pressure drop in pneumatic conveying using the discrete element modelling approach Vikrant Singh, Simon Lo January 1, 2010
Practical CFD-DEM Software Needs & Issues in Agricultural Crop Flow Modeling Robert V. Shannon Jr.
Practical CFD to Compute Resistance, Sink and Trim of Fully Appended Sailing Yachts I. M. Viola, R.G.J. Flay December 5, 2010
Polarization Characteristics and Property Distributions of a Proton Exchange Membrane Fuel Cell Under Cathode Starvation Conditions D. Ko, Y. Kang, J. Yang, J. Jeong, G. Choi, D. Kim August 1, 2010
POD analysis of large-eddy simulations in a motored engine K. Liu, D.C. Haworth April 23, 2012
Planing craft wave impact simulations Malarie Vanyo
Pickup Trucks - Box Configuration and Drag Reduction W. A. Mokhtar, R. Camp June 28, 2010
Performance of Three-Dimensional Annular Diffusers with Varying Dump Gap Ratios B. C. Bernier, J. Dunn, M. Ricklick, J. Kapat January 4, 2011
Performance of Planing Hulls in Transition Speeds Doyoon Kim
Performance of a Proposed Micro-Aerial Vehicle Design D. Cooper March 31, 2011
Performance of a Proposed Micro-Aerial Vehicle Design Dave Cooper
PEM Fuel Cell Performance Under Particular Operating Conditions Causing the Production of Liquid Water: A Morphing on Bipolar Plate's Channels Approach P. Peraudo, O. Suria, M. Aietti, E. Testa, P. Maggiore April 12, 2011
PDF-based simulations of turbulent spray combustion in a constant-volume chamber under diesel-engine-like conditions S. Bhattacharjee, J. Jaishree, V. Raj Mohan, H. Zhang, D.C. Haworth April 23, 2012
Parametric Study of Emissions From Low Calorific Value Syn-Gas Combustion, With Variation of Fuel Distribution, in a Prototype Three Sector Burner Ivan R. Sigfrid, Ronald Whiddon, Marcus Aldén, Jens Klingmann June 6, 2011
PARAMETRIC STUDY OF CENTRIFUGAL FAN PERFORMANCE: EXPERIMENTS AND NUMERICAL SIMULATION Om Prakash Singh, T. Sreenivasulu, Rakesh Khilwani, M. Kannan May 1, 2011
Parametric B-Wagenigen screw model. Verify compliance CFD computation with hydrodynamics plots Andrzej Rachwalik February 18, 2013
Parameter Driven Real-Life Design Process through STAR-CCM+ Automation Mauro Poian
Overview of SIMULIA Multiphysics Stephen King
Overview of Battery Modeling Gaëtan Damblanc
Overview & Perspectives for Internal Combustion Engine using STAR-CD Marc Zellat
Overview & Perspectives for Internal Combustion Engine using STAR-CD Marc Zellat
Overview & Perspectives for Internal Combustion Engine using STAR-CD Mark Zellat
Overset Mesh Ahn Jung Hyeon
Overset Grids Technology in STAR-CCM+: Current State & Future Developments Milovan Peric
Overset Grids in STAR-CCM+: Methodology, Applications & Future Developments Milovan Perić
Overset Grids in STAR-CCM+: Methodology, Applications & Future Developments Eberhard Schreck, Milovan Peric
Outdoor Thermal Comfort Greg Thomas
Outdoor Thermal Comfort Greg Thomas

Pages