Technical Library

Some articles have copyright restrictions,
in order to download these you will be redirected to the copyright holder's website.

Namesort descending Author(s) Date
Large Eddy Simulation of the Vortex End in Reverse-Flow Centrifugal Separators G. Pisarev, A. Hoffmann, W. Peng, H. Dijkstra February 1, 2011
Large Eddy Simulation of Turbulent Channel Flow with Heat Transfer at Low Reynolds and Mach Numbers M. Popov, K. Mikhaylyukov, A. Ryabov, F. Mendonça, C. Tzanos September 25, 2006
Large Eddy Simulations of the Flow Around High-Speed Trains Cruising Inside Tunnels Ben Diedrichs, Mats Berg, Siniša Krajnovi July 24, 2004
Large Eddy Simulations of Typical Industrial Bends Vivek Kumar, Beat Kissling, Panagiotis Papathanasiou, Filiz Aydin
Large Structures CFD Simulations for Water & Wastewater Treatment Plants Pedro Fonseca, Nelson Marques, Jorge Azevedo, Vera Rodrigues, Marion Toigo
Large-Eddy Simulation for an Axisymmetric Piston-Cylinder Assembly With and Without Swirl K. Liu, D. C. Haworth January 1, 2010
Latest Battery Design Studio® development information Robert Spotnitz
Latest function of thermal comfort model,defog and deice Takuya Kitamura
LES applications for internal combustion engine David Gosman, Richard Johns
LES in a U-Bend Pipe Meshed by Polyhedral Cells C. Moulinec, S. Benhamadouche, D. Laurence, M. Perić May 23, 2005
Let's Gain More Confidence of Clinicians with Our Colorful Contours: Blood Flow Simulation in Arteries using Abaqus & STAR-CCM+ Damon Afkari, Felipe Gabaldón, Javier Rodríguez
Lid-Driven Cavity Flow
Lid-Driven Flow in a Two-Dimensional Square Cavity CD-adapco June 1, 2011
Lithium-ion Battery Cell Model (3D-MSE) Fumitaka Goto
Macro Scale Casting Simulation using STAR-Cast Julian Gänz
Macrohomogenous Li-Ion-Battery Modeling - Strengths and Limitations Markus Lindner, Christian Wieser
Managing form, function and process: The aerodynamic development of the 2011 Ford Ranger Global Compact Pick-Up with STAR-CCM+ Robert Carstairs, Neil Lewington, Thorsten Maertens
Maneuvering predictions in the early design phase using CFD generated PMM data Claus D. Simonsen, Janne F. Otzen, Christian Klimt, Nikolaj L. Larsen, Frederick Stern
Manufacturing Simulation for the Casting Industry with STAR-Cast Julian Gänz
Mechanical Erosion of Graphite Nozzle Material in Solid-Propellant Rocket Motors P. Thakre, R. Rawat, R. Clayton January 4, 2010
Meeting the Challenges of Fluid Structure Interaction Alan Mueller
Meeting the Challenges of Fluid-Structure Interaction Alan Mueller
Meeting the Electrification Challenge with Simulation Steve Hartridge
Mesh Optimization for Ground Vehicle Aerodynamics Nor Elyana Ahmad, Essam Abo-Serie, Adrian Gaylard March 1, 2010
Meshing in STAR-CCM+: Recent Advances Aly Khawaja
Migration from STAR-CD to STAR-CCM+ at the BMW Group Arne Lehmann
Minimizing the Impact of Wind-Driven Rain on Buildings through the Use of High Performance Computer Simulations Po Woei Ken, Tan Phay Ping, Tan Hwee Sien
Missile Configuration Test Cases John Carter
Missile External Aerodynamics Using STAR-CCM+ D. Snyder
Missile External Aerodynamics Using STAR-CCM+ Deryl Snyder
Model development and experimental validation of diesel surrogate fuels using SRM-DI module simulations Terese Løvås, Alvaro Diez, Roy Crookes
Model of ventilated façade in buildings by using CFD techniques P. Amparo López-Jiménez, Miguel Mora-Pérez, Gonzalo López-Patiño, Miguel A. Bengochea Escribano
Modeling & Simulation in Aeroacoustics Fred Mendonça
Modeling an Axisymmetric Perforated Brick Catalyst Ahmad Mat Yamin
Modeling an Axisymmetric Perforated Brick Catalyst Ahmad Mat Yamin
Modeling Chemical Reactions in CFD
Modeling Complex Exhaust Gas After-Treatment by STAR-CD/Axisuite Coupling Dr. Onoufrios Haralampous
Modeling industrial multiphase flows with STAR-CCM+ Simon Lo, Dominik Kubicki
Modeling layered NOx reduction technologies S. A. Bible, Volker Rummenhohl, Mark Siebeking, Reid Thomas, Caleb Triece
Modeling of Battery Systems and Installation for Automotive Applications Richard Johns
Modeling of Battery Systems and Installations Using STAR-CCM+ Richard Johns, Bob Spotnitz
Modeling of diesel combustion using TIF and gasoline combustion using Level Set David Gosman, Richard Johns
Modeling of flame lift-off length in diesel low-temperature combustion with multi-dimensional CFD based on the flame surface density and extinction concept Ulugbek Azimova, Ki-Seong Kima and Choongsik Baeb September 1, 2010
Modeling of gasoline using ECFM-3Z with STAR-CD v4 : Investigation on spark modeling with AKTIM and Knock Marc Zellat
Modeling of Hopper discharge and pneumatic conveying using the discrete element modeling approach S. Gupta, V. Singh, Simon Lo June 1, 2009
Modeling of LOX/Methane Impingement, Mixing and Combustion Naimish B, Harpal, Eric Besnard, Reza Toossi July 25, 2010
Modeling of the flow in a water turbine of a hydroelectric generator V.A. Folomeev, F.A. Pletenev, V.P. Bashurin
Modeling the Performance of the Standard Cirrus Glider Thomas Hansen
Modeling Wind Shielding for FPSO Tandem Offloading using CFD Robert Gordon, Chief Technical Advisor – Marine