Technical Library

Some articles have copyright restrictions,
in order to download these you will be redirected to the copyright holder's website.

Name Author(s) Datesort ascending
Thermal Simulation of LED-Powered Luminaire with Coupled Electrical Circuit Analysis Pier Angelo
High Performance Unsteady Workflows with STAR-CCM+ Steve M. Legensky
最適化計算の真の可能性 (事例紹介:①頚動脈の進化メカニズムの解明 ②富士山を探せ!Google MapとHEEDSの連成) 松村 泰起, 宇田川 翔太郎
Success of STAR-CCM+ Application in the Design Process of Modern Gas Turbine Moritz Norbert様
Numerical simulation in vertical wind axis turbine with pitch controlled blades Bayeul Annie-Claude, Dockter Aurore, Simonet Sophie, Bois Gérard
Fluid-Structure Interaction in STAR-CCM+(Demo) YooChul Lee
Analysis of the Lubrication System in a High Pressure Piston Water Pump Davide Bottazzi, D. Galloni, M. Milani, L. Montorsi
Numerical Simulation of Airflow around Horizontal Axis Wind Turbine
Motor-CAD links to SPEED Mircea Popescu, Dave Staton
Wind Farm Siting Simulation in STAR-CCM+ Mike Dombrowksi
STAR-CCM+による小型垂直軸風車の特性解析 原 豊先生
The application of CFD at Heerema Marine Contractors Harald Ottens, Alessio Pistidda
STAR-CCM+ Simulations of In-Situ Thermal Treatment of Oil-Shale Michal Hradisky
DARS 1D for Powertrain Applications Fabian Mauss
CFD Lagrangian Multiphase Simulation Applied to Dust Explosion Characterization Hugo Pineda
Close Range Atmospherical Dispersion Near Nuclear Sites - An Investigation by CFD Nicolas Goreaud, B. Farges, P. Brocheny, C. Thelier
Advanced Wall Treatment Method for Turbulent Flow CFD Simulations M. Nuutinen
Eulerian –Granular Model Gyo-Soon Kim
OMAE 2012 -83472: Offshore Platform FSI Simulation C.S.
The repair of a compressor rotor blade airfoil Allan Thomson
Fluid Structure Interaction in STAR-CCM+ Alan Mueller
The Design & Analysis of a low NPSH Centrifugal Pump Featuring a Radial Inlet & an Axial Inducer using STAR-CCM+ Edward M. Bennett, Travis A. Jonas
Unsteady vehicle simulation(External aerodynamics, fans, and rotating tires) Fred Ross
The Value of 3D Scanning Technologies as a Complementary Tool to STAR-CCM+® for Various CFD Applications Pier-Olivier Duval, Philippe Vincent
Thermal & Electrochemical Simulation of Battery Pack Systems Steve Hartridge
Maneuvering predictions in the early design phase using CFD generated PMM data Claus D. Simonsen, Janne F. Otzen, Christian Klimt, Nikolaj L. Larsen, Frederick Stern
Silver Sponsors’ Presentation: SIMULIA – FSI w/ Abaqus & STAR-CCM+ William Ramroth
High Performance Computing STAR-CCM+ Simulations of Industrial Air-Assisted Flare Including Experimental Apparatus Michal Hradisky, Philip J. Smith
Casting simulation technology Julian Gänz
Validation in Model and Full Scale for Maritime Engineering Simulations Karsten Fach, Vice President – Engineering Services
設計探査 - より良い設計をより速く見つけ出す Bob Ryan
Engine Assembly Thermal Simulation using the Cycle Average Tool Michael Weaver
Tugboat and Skeg Design Claus Daniel Simonsen
Multiphase Flow Models in STAR-CCM+ Simon Lo
Coupling of STAR-CCM+ to Other Theoretical or Numerical Solutions Milovan Perić
Introduction to SPT and OLGA Iris Andersen
DARS for modeling detailed fuel chemistry Harry Lehtiniemi
Continuing Challenges to CFD Software in Aeroacoustic Fred Mendonça
コンロッド鋳造解析 加藤 丈侍様
Vehicle Thermal Reliability Fabiano Bet
Numerical Evaluation of Averaging BDFT(bidirectional flow tube) Flow meter on Applicability in the Fouling Condition Jong-Pil Park
Transfer Function Method for Aeroacoustic Noise Predictions Jonathan Scott
Latest Battery Design Studio® development information Robert Spotnitz
Fully-Automated Propeller Optimization with STAR-CCM+® and CAESES® Stefan Harries
Numerical Simulation of Unsteady Interaction of Hot Streams with HPT Rotor Blades using Harmonic Balance Method Implemented in STAR-CCM+ A.I. Iakunin, N.B. Kuznetcov, A.E. Tcvetaev
Development of an Alternative Cooling System (Earth Heat Exchanger) for Inverters of a Solar Plant A. Kneer, M. Wirtz, C. Weisshuhn
Battery Modeling Roadmap Gaëtan Damblanc
Spatially Resolved Simulations of Heterogeneous Dry Reforming of Methane in Fixed-Bed Reactors Thomas Eppinger (CD-adapco), Matthias Kraume (Technische Universität Berlin)