Technical Library | CD-adapco

Technical Library

Some articles have copyright restrictions,
in order to download these you will be redirected to the copyright holder's website.

Namesort ascending Author(s) Date
CFD in Supercritical Water-cooled Nuclear Reactor (SCWR) with Horizontal Tube Bundles Zhi Shang, Simon Lo
CFD Contributions to the Nuclear Power Renaisance Eric Volpenhein
CFD based investigation of potential power saving for different rudder types, positions and pre-swirl fins Claus D. Simonsen, Casper Nielsen, Christian Klimt-Møllenbach, Christian Råe Holm, Anton Minchev November 1, 2012
CFD applied to super and mega yatch design R Azcueta, N Rousselon August 18, 2010
CFD and wind tunnel testing Todd Leighton
CFD Analysis of the Performance of a Fast Catamaran with Rough Sea SEA Prof. Giovanni Lombardi
CFD analysis of PWR core top and reactor vessel upper plenum internal subdomain models Min-Tsung Kao, Chung-Yun Wu, Ching-Chang Chieng, Yiban Xu,Kun Yuan, Milorad Dzodzo, Michael Conner, Steven Beltz, Sumit Ray, Teresa Bissett October 1, 2011
CFD Analysis of PACE Formula-1 Car Satyan Chandra, Allison Lee, Steven Gorrell and C. Greg Jensen August 29, 2013
CFD Analysis of Gas Exchange Process in a Motored Small Two-stroke Engine R. Hariharan, N.V. Mahalakshmi, J. Krishnamoorthy January 1, 2011
CFD analysis of a two-stroke 70cc moped engine to reduce spillage losses Manish Garg, Davinder Kumar
CFD Analysis of a Duct’s Effectiveness for Model Scale and Full Scale Tobias Zorn, Justus Heimann, Volker Bertram October 10, 2010
CFD analysis of a density-dependent valve within a hot water system Helen Smith, Sally S. Bell, John N. Macbeth, David C. Christie, Neil Finlayson
CFD analyses of liquid metal flow in sub-channels for Gen IV reactors Laltu Chandra , Ferry Roelofs November 1, 2011
CFD Analyses in Tight-Lattice Subchannels and Seven-Rod Bundle Geometries of a Super Fast Reactor J. Gou, Y. Ishiwarari, Y. Oka, M. Yamakawa May 1, 2011
Cervélo P5 aerodynamic development Ivàn Sidorovich
CD-adapco's vision of STAR-CCM+ in Chemical Industry Ravindra Aglave
CD-adapco Product Strategy & Roadmap Jean-Claude Ercolanelli
CD-adapco Global Academic Program - More than Just Licenses! Tammy de Boer
Cavitation modelling using RANS approach A.I.Oprea, N.Bulten
Cavitation Enhancement of Silt Erosion: Numerical Studies P. J. Dunstan, S. C. Li March 9, 2010
Cavitation CFD using STAR-CCM+ of an Axial Flow Pump with Comparison to Experimental Edward Bennett
Casting Simulations with STAR-Cast Julian Gänz
Casting Simulations with STAR-Cast Julian Gänz
Casting simulation technology Julian Gänz
Calibrating the γ-Reθ Transition Model for Commercial CFD P. Malan, K. Suluksna, E. Juntasaro January 5, 2009
Calibrating the γ-Reθ Transition Model P. Malan, K. Suluksna, E. Juntasaro September 1, 2009
Breaking Wave Impact on a Platform Column: An Introductory CFD Study Csaba Pakozdi, Timothy E. Kendon, Carl-Trygve Stansberg June 19, 2011
Boiling Heat Transfer in ITER First Wall Hypervapotrons Dennis Youchison, Mike Ulrickson, Jim Bullock
Better Reactors Grow from Better Simulations Emilio Baglietto
Better Reactors Grow from Better Simulations Emilio Baglietto
Best Practices Workshop (III): Heat Transfer Modeling Peter Ewing
Best Practices Workshop (II): Volume Meshing Kynan Maley
Best Practices Workshop (I): Surface Meshing Peter Ewing
Best Practice: Turbomachinery Simulation Shigetoshi Maeda
Best Practice: Multiphase Flows Xiao Hu
Best Practice: Heat Transfer Simulation Hidemoto Kojima
Best Practice: DEM Mitsushi Okada
Best Practice: CFD Analysis Guidelines for Engine Simulation Shota Niikura
Berechnung der Luftführung in Schweinemastställen mit Hilfe von Computersimulationen Stefan Linke
Benchmarking CD-Adapco's Star-CCM+ in a Production Design Environment Mikhail M. Grigoriev, Chester V. Swiatek,, James A. Hitt June 14, 2010
Benchmark Study on Thruster-Hull Interaction on a Semi-Submersible Crane Vessel Harald Ottens, Radboud van Dijk, Geert Meskers June 19, 2011
Benchmark Study Between CFD and Model Tests on a Semi-Submersible Crane Vessel Harald Ottens, Radboud van Dijk, Geert Meskers May 31, 2009
BEHR Fan Modeling Approach: From Transient Fan Blade Development to System Optimization with Underhood Simulation F. Brotz, F. Guilbaud, A. Kleber, C. Marola
BDS Demo - Battery Modeling Roadmap Robert Spotnitz , Gaëtan Damblanc
Battery Simulation Module Demo Gaëtan Damblanc
Battery Modeling Roadmap Gaëtan Damblanc
Battery Design Studio Update
Battery Design Studio® - an update Fred Mendonça
Battery Design Overview Robert Spotnitz
BANC –PDCC :Gulfstream G550 NLG ¼-scale Simulation using STAR-CCM+ Fred Mendonça