Technical Library

Some articles have copyright restrictions,
in order to download these you will be redirected to the copyright holder's website.

Name Author(s) Datesort descending
Modelling of Break-up and Coalescence in Bubbly Two-Phase Flows Simon Lo, Dongsheng Zhang January 1, 2009
Experimental and numerical studies of portable PEMFC stack S. Shimpaleea, M. Ohashia, J.W. Van Zeea, C. Zieglerb, C. Stoeckmann, C. Sadeler, C. Hebling January 1, 2009
Calibrating the γ-Reθ Transition Model for Commercial CFD P. Malan, K. Suluksna, E. Juntasaro January 5, 2009
Energetic-Nanoparticle-Enhanced Combustion of Liquid Fuels in a Rapid Compression Machine Casey M. Allen , Tonghun Lee January 8, 2009
Sub-domain based numerical modeling of ship hull propeller interaction G.Dhinesh, V. Anantha Subramaian, K. Murali February 1, 2009
CFD-Supported Design of Lifeboats Hans Jørgen Mørch, Milovan Perić, Jasmin Röper, Eberhard Schreck March 16, 2009
Estimates of pressure gradients in PEMFC gas channels due to blockage by static liquid drops M. Venkatraman, S. Shimpalee, J.W. Van Zee, Sung In Moon, C.W. Extrand April 1, 2009
Validation of STAR-CD with TCM Plug-in Tool for Thermal Comfort Simulations S Evans, M Sabanca, O Moos, E Ruiz, A Strobel April 20, 2009
Experimental and Numerical Investigation of Conjugate Heat Transfer in a HSDI Diesel Engine Water Cooling Jacket S. Fontanesi, E. V. McAssey, Reggio Emilia April 20, 2009
Further Analysis of Pickup Trucks Aerodynamics W. A. Mokhtar, C. Britcher, R. Camp April 20, 2009
Assessing the Ventilation Effectiveness of Naturally Ventilated Livestock Buildings under Wind Dominated Conditions Using Computational Fluid Dynamics T. Norton, J. Grant, R. Fallon, D.W. Sun May 1, 2009
Benchmark Study Between CFD and Model Tests on a Semi-Submersible Crane Vessel Harald Ottens, Radboud van Dijk, Geert Meskers May 31, 2009
Using CFD to Determine Heave Added Mass and Damping of a Suction Pile Richard Zoontjes, Harm Siegersma, Harald Ottens May 31, 2009
CFD Modeling of Fully Nonlinear Water Wave Tank Guangyu Wu, Owen H. Oakley, Jr. May 31, 2009
Modeling of Hopper discharge and pneumatic conveying using the discrete element modeling approach S. Gupta, V. Singh, Simon Lo June 1, 2009
Numerical Predictions of Gas Porosity in Casting Processes using Fully Coupled Mold-filling and Solidification Simulation S. Jana, J. Jakumeit, M. Y. Jouani June 7, 2009
Influence of the Gas Phase on Mold Filling for Sand Casting J. Jakumeit, K. Goodheart, M. Albers June 7, 2009
Development and Validation of a Computational Fluid Dynamics Model for the Simulation of Two-Phase Flow Phenomena in a Boiling Water Reactor Fuel Assembly Adrian Tentner, W. David Pointer, Simon Lo, Andrew Splawski July 12, 2009
A robust and efficient finite volume scheme for the discretization of diffusive flux on extremely skewed meshes in complex geometries Philippe Traoré, Christophe Louste, Yves Marcel Ahipo , Paul Sabatier Toulouse August 1, 2009
Internal flow Simulation of Dump Diffusers for Modern Aircraft Engines V.R.Sanal Kumar, Santosh Kumar Sahoo, S.Raghunathan August 2, 2009
3-D Numerical Modeling of Unsteady Heat Transfer in a Rectangular Duct K. Isa, I. Ekmekci, H. Guven, N. Sozbir August 2, 2009
Calibrating the γ-Reθ Transition Model P. Malan, K. Suluksna, E. Juntasaro September 1, 2009
Optimization of Air-Cooling System of 4-Stroke Scooter Engine V. Kumar, O. Singh, M. Garg, Y. V. Chaudhary September 9, 2009
Flow Induced Vibration Forces on a Fuel Rod by LES CFD Analysis A. M. Elmahdi, R. Lu, M. E. Conner, Z. Karoutas, E. Baglietto September 25, 2009
Numerical investigation of supercritical water-cooled nuclear reactor in horizontal rod bundles Zhi Shang, Simon Lo September 30, 2009
STAR-CCM+ and the Orion Launch Abort Vehicle J. Melton September 30, 2009
Accuracy and stability in incompressible SPH (ISPH) based on the projection method and a new approach Peter Stansby, Dominique Laurence October 1, 2009
Advances in Simulation for Marine Engineering M. Perić, E. Schreck October 20, 2009
Structural and Aerodynamics Analysis on Different Architectures for the Elettra Twin Flyer Prototype P. Gili, M. Battipede, M. Visone, M. Vazzola, P. Farina November 1, 2009
Simultaneous Evaluation on Aerodynamics and Air-cooling Performances for Motorcycle using CFD Analysis T. Shimizu, T. Abe, Y. Sunayama, S. Watanabe, E. Nakamura November 3, 2009
Simulation of Open Channel Turbulent Flow Over Bridge Decks and Formation of Scour Hole Beneath the Bridge Under Flooding Conditions Bishwadipa Adhikary, Pradip Majumdar, Milivoje Kostic, Steven A. Lottes November 13, 2009
Three-dimensional scouring analysis for open channel pressure flow scour under flooded bridge decks Bishwadipa Adhikary, Pradip Majumdar, Milivoje Kostic, Steven A. Lottes, Bhaskar Rao Tulimilli November 13, 2009
Design and Optimization of a Fin Stabilizer Using CFD Codes and Optimization Algorithms 1 S. Della Rosa, 2 M. Maceri, 3 I.M. Viola, 4 S. Bartesaghi November 26, 2009
Industrial LES with Unstructured Finite Volumes January 1, 2010
Predicting pressure drop in pneumatic conveying using the discrete element modelling approach Vikrant Singh, Simon Lo January 1, 2010
Large-Eddy Simulation for an Axisymmetric Piston-Cylinder Assembly With and Without Swirl K. Liu, D. C. Haworth January 1, 2010
Evaluation of One-Group Interfacial Area Transport Equation for the Air/water Flow Condition with CFD Code B.J. Yun, A. Splawski, S. Lo, C.–H. Song January 1, 2010
Advances in the development and validation of CFD-BWR , a Two-Phase Computational Fluid Dynamics model for the simulation of flow and heat transfer in Boiling Water Reactors Adrian Tentner, Simon Lo, David Pointer, Andrew Splawski January 1, 2010
Application of Sgamma Model with CFD Code to Predict Subcooled Boiling Flow B.J. Yun, A. Splawski, S. Lo, C.–H. Song January 1, 2010
Recent progress in CFD modelling of multiphase flow in horizontal and near-horizontal pipes Simon Lo, Antonino Tomasello January 1, 2010
Eulerian-Eulerian CFD Model for the Sedimentation of Spherical Particles in Suspension with High Particle Concentrations B. Balakin, A. Hoffmann, P. Kosinski, L. Rhyne January 1, 2010
Mechanical Erosion of Graphite Nozzle Material in Solid-Propellant Rocket Motors P. Thakre, R. Rawat, R. Clayton January 4, 2010
Applications of Large Eddy Simulations in Nuclear Field J.P. Simoneau, J. Champigny, O. Gelineau February 1, 2010
Numerical Simulation of Friction Stir Butt Welding Process for AA5083-H18 Sheets D. Kim, H. Badarinarayan, J. H. Kim,, C. Kim, K. Okamoto, R.H. Wagoner, K. Chung March 1, 2010
Mesh Optimization for Ground Vehicle Aerodynamics Nor Elyana Ahmad, Essam Abo-Serie, Adrian Gaylard March 1, 2010
Cavitation Enhancement of Silt Erosion: Numerical Studies P. J. Dunstan, S. C. Li March 9, 2010
Numerical investigation of DQMoM-IEM as a turbulent reaction closure Jethro Akroyd, Alastair J. Smith, Laurence R. McGlashan, Markus Kraft March 15, 2010
Modelling Auto Ignition of Hydrogen in a Jet Ignition Pre-chamber A. A. Boretti April 1, 2010