Technical Library | CD-adapco

Technical Library

Some articles have copyright restrictions,
in order to download these you will be redirected to the copyright holder's website.

Name Author(s) Datesort descending
Gekoppelte Simulation von Strömung und Bewegung umströmter Körper Prof. Dr. Milovan Peric
Modeling of the flow in a water turbine of a hydroelectric generator V.A. Folomeev, F.A. Pletenev, V.P. Bashurin
Improving Layer Control in Multi-Layered Polyester Films using Computational Fluid Dynamics (CFD) James Champion
Progress in Tools for Turbulence Modelling and Simulation Neil Ashton, Alex, Skillen, Alistair Revell, Dominique Laurence, Sylvain Lardeau
Best Practice: Heat Transfer Simulation Hidemoto Kojima
CFD analysis of a density-dependent valve within a hot water system Helen Smith, Sally S. Bell, John N. Macbeth, David C. Christie, Neil Finlayson
3D Conjugate Heat Transfer Analysis of the Next Generation: Inner Reflector Plug for the Spallation Neutron Source Ashraf Abdou
Aerospace Applications & Case Studies Deryl Snyder
Profiting From CFD Use Mike Porter, President and Principal Engineer
Counteracting ring formation in rotary kilns Michele Pisaroni
Unsteady Cavitation Simulation on Kappel Propeller with a Hull Wake Field Rasmus Møller Bering
Validation of STAR‐CCM+ with the OECD/NEA T‐Junction Blind Benchmark Santhosh Jayaraju
Numerical study of flow stream in mini wawt with relative rotating blades Bayeul Annie-Claude, Simonet Sophie, Dockter Aurore, Bois Gérard
Towards a Full 3D Simulation of a HLM Reactor Vincent Moreau
Automation examaples in STAR-CCM+ Tom Walker
Modeling of Battery Systems and Installation for Automotive Applications Richard Johns
Model development and experimental validation of diesel surrogate fuels using SRM-DI module simulations Terese Løvås, Alvaro Diez, Roy Crookes
Flow Design Development of a Dual Stream Diesel Oxidation Catalyst (DOC) using Topology Optimization Markus Stephan
Fire and Smoke Modeling in Tunnels and Emergeny Stations Peter Bailey
Modeling an Axisymmetric Perforated Brick Catalyst Ahmad Mat Yamin
Aircraft Passenger Cabin Thermal Comfort Analysis by Means of Integrated Mono Dimensional/CFD Approach P. Borrelli, A. Romano, D. Cannoletta
Alternative fuels for IC Engines Andreas Kolbeck
Aeroelastic Workshop: The Validation of Aeroelastic Simulations using STAR-CCM+ coupled to Abaqus Rafael Ritterbusch
FSI Demonstration Hyun Kim
Feedback Driven 6-DoF Modeling of a Tilt-Duct Aircraft Paul Vasilescu
Macro Scale Casting Simulation using STAR-Cast Julian Gänz
Simulation of manufacturing processes Tom Marinaccio
Modeling layered NOx reduction technologies S. A. Bible, Volker Rummenhohl, Mark Siebeking, Reid Thomas, Caleb Triece
Design Competition Team List
Best Practices Workshop (II): Volume Meshing Kynan Maley
Round Table Discussion: Hardware & Software Trends Driving Simulation for Energy Engineering Media and Industry Experts
Analysis of the airstream in the ECS roller dynamometer building Stefan Schnörch
Optimate Evaluation: Design Optimization of a Generic Glider Nathan Richardson
Outdoor Thermal Comfort Greg Thomas
Analysis of the 3D Flow & Heat Transfer of the Finned-Tube Bank for Creation Effective Counting Method for Steam Turbines Oil Coolers Yulia S. Bagaeva, N. N. Kortikov
Meeting the Challenges of Fluid Structure Interaction Alan Mueller
Reacting Flow Applications in STAR-CCM+ Rajesh Rawat
Use of STAR-CCM+ in marine and offshore engineering and future trends Milovan Perić
Industrial Electroplating Systems Tilman Botsch
Use of STAR-CCM+ for Heat Exchanger Product Development Gary G Yu, Martin Timmins, Mario Ciaffarafa
Near-term pre/post-processing developments Gerald Schmidt
Aeroacoustics Simulations for the Aerospace Industry Fred Mendonça , Deborah Eppel
Eulerian two-phase Computational Fluid Dynamics for boiling water reactor cor analysis W. David Pointer, Adrian Tentner, Tanju Sofu, David Weber, Simon Lo , Andrew Splawski
Software development information of STAR-CCM+ BSM v6.04/v6.06 Steve Hartridge
Automation for STAR-CCM+ Kim Hak-Soon
STAR-CCM+ DFBI in Naval Applications Minyee Jiang
Simulation of a vane cell oil pump Thomas Fischer, Ulrich Stubbemann, Jan Fischer, Kai Fellmann
Simulating the Blister Tap Hole Concept Design using CHT Capabilities in STAR-CCM+ Dr. Bennie Henning
Cavitation CFD using STAR-CCM+ of an Axial Flow Pump with Comparison to Experimental Edward Bennett
Validation of STAR-CCM+ with the OECD/NEA T-junction Blind Benchmark S. Jayaraju, E. Komen, E. Baglietto