Technical Library

Some articles have copyright restrictions,
in order to download these you will be redirected to the copyright holder's website.

 
Name Author(s) Datesort descending
Immersive Engineering and Multimodal Process Visualization E. Schnell
Conjugate Heat Transfer (CHT) Simulation with STAR-CCM+ Tom Marinaccio
Best Practices Workshop (II): Volume Meshing Kynan Maley
A CFD Study of Particle-Laden Flow of a Tundish Water-Model Eike Runschke, Zeljko Cancarevic, Henning Schliephake
HL-20 Aerodynamics at Hypersonic Speeds James Clement
Application of DARS 1D on in-cylinder combustion and aftertreatment Karin Fröjd
The importance of correct modeling of bubble size and condensation in prediction of subcooled boiling flows S. Lo, A. Splawski, B.J. Yun
STAR-CCM+ Capabilities for Aerospace & Defense Deryl Snyder
Aerospace Applications & Case Studies Deryl Snyder
A Co-Simulation Approach to Modeling the Solenoid Valve Multiphysics Sharat Prasad, Kaushik Das, Krishna Gundu
Modelling Multiphase Flows in the Chemical and Process Industry Simon Lo
Aerodynamic development of a time-trial bicycle helmet: From CFD to le the eulerian multiphase flow modelthe eulerian multiphase flow model - Tour de France Geneviève Dutil, Yannick Sirois
Aerodynamic Optimization of Chalmers Formula Student Vehicle Athanasios Tzanakis
Use of STAR-CCM+ in marine and offshore engineering and future trends Milovan Perić
Analysis of the Coffee Roasting Process under Actual Operating Conditions Stefano Farina, Massimo Milani, Luca Montorsi
The Increasing Demand for Virtual Prototypes in Civil Engineering Erwin Schnell
DARS SRM as Combustion Model for Engine Concept Development Arne Andersson
Near-term pre/post-processing developments Gerald Schmidt
Cooling Airflow System Modeling in CFD Using Assumption of Stationary Flow Peter Gullberg, Lennart Lofdahl, Peter Nilsson
Computational Fluid Dynamics for Reactor Design & Safety-Related Applications Emilio Baglietto
Automation for STAR-CCM+ Kim Hak-Soon
Heat Transfer Through an Axial Fan with a Non-Homogeneous Temperature Source Markus Riesterer, Bettina Frohnapfel, (Karlsruhe Institute of Technology), Thomas Binner, Heinrich Reisterer, (Daimler AG)
Army Ground Vehicle Use of CFD and Challenges Scott Shurin
Deep & wide - CFD in civil engineering Raphael Brügger, Erwin Schnell
Integrated Meshing in STAR-CCM+ Aly Khawaja
Simulating the Blister Tap Hole Concept Design using CHT Capabilities in STAR-CCM+ Dr. Bennie Henning
Battery Modeling Solutions Gaetan Damblanc
Better Reactors Grow from Better Simulations Emilio Baglietto
Close Range Atmospherical Dispersion Near Nuclear Sites - An Investigation by CFD Nicolas Goreaud, B. Farges, P. Brocheny, C. Thelier
Industrial Application of CFD in Airbus Dr. Andreas Wick
Prediction of cavitation dynamics in marine applications Iulia Oprea, Norbert Bulten
A First Contact with STAR-CCM+: Comparing Analytical & Finite Volume solutions with STAR-CCM+ Simulations Michael Heyer
Emulating the Direct Blister Furnace Process with Coal Combustion Bennie Henning
Thermal Simulation of LED-Powered Luminaire with Coupled Electrical Circuit Analysis Pier Angelo
Integrating STAR-CCM+ with a Systems Analysis Code for Nuclear Reactor Safety Simulations Justin W. Thomas
Boiling Heat Transfer in ITER First Wall Hypervapotrons Dennis Youchison, Mike Ulrickson, Jim Bullock
Success of STAR-CCM+ Application in the Design Process of Modern Gas Turbine Moritz Norbert
Performance of Planing Hulls in Transition Speeds Doyoon Kim
Analysis of the Lubrication System in a High Pressure Piston Water Pump Davide Bottazzi, D. Galloni, M. Milani, L. Montorsi
Increasing Exchanger Capacity with CFD Mike Porter, President and Principal Engineer
Customizing STAR-CCM+ for seamless integration to PLM Thomas Walker
STAR-CCM+ Simulations of In-Situ Thermal Treatment of Oil-Shale Michal Hradisky
Thermal Management of a Turbocharger for Unsteady Operation Dr. Fabiano Bet
Numerical study of cavitating flow inside a flush valve Annie-Claude BAYEUL-LAINẺ, Sophie SIMONET, Guy CAIGNAERT
Examining the Cost Return Ratio for CFD in the Gas, Oil and Chemical Industries Mike Porter, President
A fast and easy optimization tool for electric rotating machine design Luca Gregorio Frigoli
OMAE 2012 -83472: Offshore Platform FSI Simulation C.S.
Automated Exhaust Line Simulation Yohann Perrot
Transfer Function Method for Aeroacoustic Noise Predictions Jonathan Scott
Fluid Structure Interaction in STAR-CCM+ Alan Mueller

Pages