Technical Library

Some articles have copyright restrictions,
in order to download these you will be redirected to the copyright holder's website.

 
Name Author(s) Datesort descending
基于STAR-CCM+的FAD组件润滑仿真分析
Information Gain through Validation with Uncertainty Quantification (V/UQ) Philip J. Smith
DARS SRM as Combustion Model for Engine Concept Development Arne Andersson
Water atomization in spray nozzles Fredrik Jaremann
Cooling Airflow System Modeling in CFD Using Assumption of Stationary Flow Peter Gullberg, Lennart Lofdahl, Peter Nilsson
流れの制御によるタイヤ温度低減 名塩 博史様
Computational Fluid Dynamics for Reactor Design & Safety-Related Applications Emilio Baglietto様
Heat Transfer Through an Axial Fan with a Non-Homogeneous Temperature Source Markus Riesterer, Bettina Frohnapfel, (Karlsruhe Institute of Technology), Thomas Binner, Heinrich Reisterer, (Daimler AG)
Best Practice: Heat Transfer Simulation Hidemoto Kojima
Army Ground Vehicle Use of CFD and Challenges Scott Shurin
STAR-CCM+ Simulations of In-Situ Thermal Treatment of Oil-Shale Michal Hradisky
FSI Demonstration Hyun Kim
Numerical study of cavitating flow inside a flush valve Annie-Claude BAYEUL-LAINẺ, Sophie SIMONET, Guy CAIGNAERT
DESとFW-Hによるシロッコファンの送風音予測 岩田 透様
Battery Modeling Solutions Gaetan Damblanc
The importance of correct modeling of bubble size and condensation in prediction of subcooled boiling flows S. Lo, A. Splawski, B.J. Yun
Simulation of manufacturing processes Tom Marinaccio
Industrial Application of CFD in Airbus Dr. Andreas Wick
Development of the DLN Micro-mix Hydrogen Combustion Technology with STAR-CCM+® Anis Haj Ayed
A Co-Simulation Approach to Modeling the Solenoid Valve Multiphysics Sharat Prasad, Kaushik Das, Krishna Gundu
A First Contact with STAR-CCM+: Comparing Analytical & Finite Volume solutions with STAR-CCM+ Simulations Michael Heyer
Best Practices Workshop (II): Volume Meshing Kynan Maley
Emulating the Direct Blister Furnace Process with Coal Combustion Bennie Henning
基于纯电动车空气动力学性能研究
Application of DARS 1D on in-cylinder combustion and aftertreatment Karin Fröjd
Accurate and Efficient Turbomachinery Simulation Chad Custer
Thermal Simulation of LED-Powered Luminaire with Coupled Electrical Circuit Analysis Pier Angelo
3D-Electrochemistry: Designing and resolving the microstructure of an electrode Gaëtan Damblanc
Boiling Heat Transfer in ITER First Wall Hypervapotrons Dennis Youchison, Mike Ulrickson, Jim Bullock
一次元ツール(JMAG、BDS)を活用した 設計探査の提案 松村 泰起, 盛 哲博, 佐伯 卓哉
Success of STAR-CCM+ Application in the Design Process of Modern Gas Turbine Moritz Norbert様
Analysis of the Lubrication System in a High Pressure Piston Water Pump Davide Bottazzi, D. Galloni, M. Milani, L. Montorsi
Meeting the Challenges of Fluid Structure Interaction Alan Mueller
Increasing Exchanger Capacity with CFD Mike Porter, President and Principal Engineer
Numerical Simulation of Airflow around Horizontal Axis Wind Turbine
STAR-CCM+による小型垂直軸風車の特性解析 原 豊先生
Multiphase Flow Models in STAR-CCM+ Simon Lo
Near-term pre/post-processing developments Gerald Schmidt
Examining the Cost Return Ratio for CFD in the Gas, Oil and Chemical Industries Mike Porter, President
Eulerian Model Performance in CFD Calculating the Drag Coefficient from Drift-Flux Model for Gas-liquid Two-phase Flow in Vertical Pipes Hugo Pineda
Close Range Atmospherical Dispersion Near Nuclear Sites - An Investigation by CFD Nicolas Goreaud, B. Farges, P. Brocheny, C. Thelier
OMAE 2012 -83472: Offshore Platform FSI Simulation C.S.
Automation for STAR-CCM+ Kim Hak-Soon
1-D/3-D Co-Simulation of Environmental Control System for Aircraft Klaus Wolf
某乘用车乘员舱吹脚模式流场仿真与改进
Deep & wide - CFD in civil engineering Raphael Brügger, Erwin Schnell
Fluid Structure Interaction in STAR-CCM+ Alan Mueller
The Design & Analysis of a low NPSH Centrifugal Pump Featuring a Radial Inlet & an Axial Inducer using STAR-CCM+ Edward M. Bennett, Travis A. Jonas
Simulating the Blister Tap Hole Concept Design using CHT Capabilities in STAR-CCM+ Dr. Bennie Henning
Aircraft Damping Derivatives Estimation Using STAR-CCM+ A. Lerro, M. Visone

Pages